The proven BGM Superstrong clutch is now also available for the Vespa GS150 / GS160 and SS180 models. The coupling is delivered ready for installation. It replaces the serial coupling of the GS / SS models 1: 1 and can usually * be used without further modifications. The clutch is available with 22 teeth (like the original) or with 23 teeth (longer reduction). Helical teeth [...]

BGM hoses are manufactured according to our specifications especially for the needs of Vespa and Lambretta scooters. The butyl content is over 50%, which makes them extremely airtight and absolutely reliable. The high butyl content makes the hose expensive to manufacture, but in our opinion the result justifies the effort. The valves are in model-specific [...]

Water pump -BGM PRO- Universal, 12V, delivery rate 8l / min. A must for sprinters. The external water pump. At over 14.000 rpm, the mechanical water pumps are too fragile and also cost valuable performance. Water pump BGM Pro, CNC manufactured, massive pump body and paddle wheel. Connection: 12V DC (direct current) Pump power 8l / min Hose connections: Ø15mm Current consumption: 0,15A Speed: 3200U / min Watt: 3,52W bgm - Item number: [...]

bgm - Item number: BGM2225HS Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 1,5 - XNUMXmm are interested, also looked for: Spacer | [...]

bgm - Item number: BGM6413TC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Frame> Cables> Cables Other customers who are interested in throttle cable -BGM ORIGINAL- Vespa PX Lusso ( from 1984) - interested in black, also looked for: throttle cable | Throttle cable | Throttle rope | Throttle | [...]

The bgm Pro clutch pressure plates are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the plates extremely resistant to wear. The plates are then precisely sanded, so that the pressure pad with a flat and hard surface finds perfect working conditions. The pressure plates are manufactured exactly according to Piaggio original dimensions. Always [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

BGM PRO Superstrong clutch linings type CR The BGM carbon clutch linings have an organic lining material with very good grip. It offers an ideal balance between performance and durability. The CR single lining is provided with lining material on both sides and therefore fits the following clutch types: Lambretta LTH Liedolsheim (7x) Vespa Smallframe MMW Hartz4 (4x) Vespa Smallframe MMW Hartz5 [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]

Front shock absorber pair bgm COMPETITION with 16-way adjustable rebound and compression regulation. Thanks to the expansion tank, the COMPETITION dampers are fully suitable for racing and were successfully driven by the Replay team in the 2018 English BSSO racing series. Compared to the BGM Pro Sport dampers, they offer a wider setting range, respond even better and are thermally very stable due to the larger oil volume. [...]

bgm - Item number: BGM666PXA2 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 8,45 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition set -BGM PRO 12V Touring - Vespa P125X / P200E (1977-1983, models with indicator, voltage regulator, without battery) - P125X (VNX1T), P150X (VLX1T), P200E (VSX1T) are interested in [...]