Tuning cylinder 150ccm BGM PRO suitable for Vespa VM, VN, VB1, VGL1, VL1 BGM PRO cylinder with 150ccm with 57 mm stroke suitable for all 2-channel engines. The cast iron cylinder has three transfer ports and is suitable for all wideframe motors with a 57 mm stroke. The cylinder with the 125 mm crankshaft fits on the 54 cc engines with 57 mm stroke.

The BGM PRO ignition set made of high-quality components for a double conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit as well as a reinforced crankshaft of the Vespa PK XL models. This set is for the Vespa Smallframe models with a small generator cone. This includes all V50, 50N, SS50, SR50, SS90, V90, 90 Racer, V100, PV, ET3, [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

abcd A 02 2,00 0,60 20,00 12,00 A 07 2,00 1,00 18,00 14,00 A 10 2,02 0,60 18,00 14,00 A 11 2,02 0,60, 20,00 12,00 12 A 2,00 1,79 20,00 12,00 13 A 2,00 1,79 22,00 10,00 14 A 2,02 1,00 18,00 14,00 15 A 1,98 1,77 20,00 12,00 18 A 2,04 XNUMX [...]

LED taillight for Piaggio TPH, NRG 1. Welcome to the 21st century! With this taillight you are in the right place. Super bright and quickly responding LEDs ensure a super fat look. The high-quality clear glass also ensures a super subtle and appealing rear. Of course with E-marking and therefore completely legal. bgm - Item number: BGM5008LED [...]

bgm - Item number: BGM21090WLAC Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in wiring base plate -BGM ORIGINAL HP V3.0 AC- Lambretta DL, GP - electronic ignition are interested, also looked for: ignition | Alternator | Lima | [...]

The power and torque values ​​of so-called smallframe motors that are now possible have increased significantly in recent years and seem to be growing steadily. Power and torque values ​​of well over 35PS / 30Nm can be found more and more frequently. As a result, other components are of course also stressed significantly more. An important and highly stressed link between the crankshaft and the gearbox is [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM1550H Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,31 kg Category: Engine> Cylinders> Cylinder heads Other customers who are interested in cylinder head -BGM PRO 150 ccm, wideframe , Faro Basso, Ø = 57mm, stroke = 57mm- Vespa 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T are also looking for: [...]

IGNITION CABLE BGM PRO SILICONE 7MM The BGM Pro silicone ignition cable is a real professional product. The tinned copper wire with 1,5mm² enables a powerful spark under every condition. It is suitable for retrofitting on every motor and offers the following advantages compared to a standard PVC cable: High voltage resistant up to over 50000V (50kV) Heat resistant up to 200 ° (fire protection class FT-1 / VW-1) Copper core [...]

bgm - Item number: BGM6477TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 7mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

Indicator update for Vespa GTS models built before 2014! THE DESIRE The Vespa GTS models from 2014 already have an LED daytime running light which is integrated in the indicators. These indicators also fit in all previous years of the GT / GTS / GTL series. THE PROBLEM The wiring is not, however, due to the different plug types used at the factory.