Perfectly suited to block the drive via the clutch basket and to be able to loosen the clutch nut, screw of the front sprocket and even the fan wheel nut. bgm - Item number: 8099003 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Motor> Clutch> Tools Other customers who are interested in [...]

Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]

bgm - Item number: SC4011 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Rubber parts> Seals Other customers who are interested in sealing fuel tap inside -BGM ORIGINAL 26x4mm- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1204TL Availability: in stock (Please check the [...]

bgm - Item number: BGM0900E Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust spring -BGM ORIGINAL- stainless steel - 50mm , also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer | Exhaust [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The bgm EVOLUTION crankshafts are racing shafts of the highest quality. The completely forged shafts are finely balanced full metal shafts. Both the crank webs and the connecting rod are forged. This gives the wave an incredible resilience. In order to achieve the highest possible weight, which is extremely important for low-vibration engine operation, the shafts were [...]

bgm - Item number: 3332152 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,70 kg Category: Frame> Tank> Petrol taps Other customers who are interested in mounting for fuel tap lever -FAST FLOW- Vespa - Interested in aluminum, also looked for: fuel tap | Vacuum cock | Fuel cock | Rooster | Petrol tank | Petrol [...]

bgm - Item number: BGM6397UG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -BGM ORIGINAL, Ø = 1.2 mm x 2500mm, sleeve = 2200mm, nipple Ø = 5.5mm x 7.5mm, inner sleeve PE, braided cable, gray - used as a throttle cable interested, searched [...]

Practical quick coupling that is mounted in the fuel hose. If, for example, the tank or the carburettor is to be removed, the hose at the coupling is disconnected. The internal valves prevent fuel leakage on either side of the clutch. They can be separated quickly at the push of a button with just one movement and can be easily closed again by sticking them together. [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]