Corresponds to the original spare part, so in the very best quality. Great replacement for anyone struggling with problems caused by a defective old stator plate. bgm - Item number: SR1630851 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Ignition> Ignitions Other customers who are interested in [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: 3332152 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,70 kg Category: Frame> Tank> Petrol taps Other customers who are interested in mounting for fuel tap lever -FAST FLOW- Vespa - Interested in aluminum, also looked for: fuel tap | Vacuum cock | Fuel cock | Rooster | Petrol tank | Petrol [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

bgm - Item number: BGM01700N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Coupling> Nuts Other customers who are interested in M10 x1.00 (fine thread) SW = 16 half height -BGM PRO- (used as clutch nut Vespa for auxiliary shaft BGM PRO for V50, PV125, ET3, PK S, PK [...]

Nice spare part that enhances every restoration. Aluminum. bgm - Item number: 9010029 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Motor> Gearbox> Kickstarter Other customers who are looking for Kickstarter Vespa V50, PV, ET3 - aluminum polished, also searched for: Kickstarter | Starter lever | [...]

Cylinder base gasket -BGM PRO- 1,5mm Pinasco 213ccm bgm - item number: 3820043 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who Interested in spacer cylinder base -BGM ORIGINAL Pinasco 213 ccm / Piaggio 200 ccm- Vespa PX200, Rally200 - 1.5mm, also searched [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]

Cracked! A pull rope can digest incredibly large loads. The tear limit of the trains we offer is several tons of pulling force. In a pinch you can even tow cars with it. Why a train breaks anyway depends on the fact that it is loaded incorrectly. Zugkiller No. 1 is the so-called common cast ridge. The brake-clutch levers are often [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfect for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for the on-board electronics of two-wheelers.

bgm - Item number: BGM0903EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 70mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]