BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

bgm - Item number: BGM4502 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who are interested in brake lever set -BGM PRO CNC Sport, short (130mm) - Vespa GT, GTL, GTS 125-300 - chrome are interested, also looked for: brake lever | Brake handle | Lever [...]

Auxiliary jet set -BGM PRO Mikuni TM- (15,0 - 37,5) - (15-17.5-20-22.5-25-27.5-30-32.5-35-37.5) bgm - item number: 2599130 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Carburetor> Carburetor nozzles Other customers who are interested in auxiliary nozzle set -BGM PRO for Mikuni (type: VM22 / 210) TM / TMX - (15 -0-37-5) - [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

With the Sport and Competition line, BGM Pro has two high-quality shock absorber series in its delivery program. Both have in common the perfect workmanship, the high material quality and approval by means of ABE. Despite their high resilience, the dampers are very light, as they are made of high-strength CNC aluminum and have excellent surface protection made of hard anodized aluminum. The front [...]

bgm - Item number: BGM0233S10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinders> Spacers Other customers who are interested in spacers cylinder base -BGM ORIGINAL for Polini Evolution 133ccm , Parmakit SP09 130ccm, 135ccm, Parmakit Evo (-C) 135ccm- Vespa V50, PV125, ET3, PK50, PK80, PK125 - [...]

bgm - Item number: BGM66060P1 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 1 plug contact are of interest, also looked for: Plug | Cable | Ignition stator | [...]

High-precision reproduction of the original auxiliary shaft axis of the Vespa GS160 and SS180 models. Made of extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. The scope of delivery also includes the corresponding red brass fitting bushing. This means that the primary drive can be repaired with 100% factory specifications. bgm - Item number: 7676645 Availability: in stock (Please check the [...]

For permanent fixation, stickers need a clean, smooth and degreased surface. Our brake cleaner, for example, is very suitable for degreasing. In the case of larger areas to be glued, it is always an advantage to spray the area with a little water before gluing. The water can also be mixed with a few drops of detergent to make it [...]

Good tool = good result This is what the German-made tool for dismantling / assembling the drive-side ball bearing (6305) in the Lambretta motor stands for. This means that replacement is not only done quickly but also precisely. To dismantle, heat the bearing in the motor and then simply pull it out with the tool. For mounting the ideally cold bearing in a [...]