High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

bgm - Item number: BGM6484 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Brakes> Nuts Other customers who are interested in knurled nut brake cable -BGM ORIGINAL M6 x 1,0, 10mm, SW5- brake cable front Vespa PK, brake cable rear Vespa T125 XNUMXccm, conversion Vespa PX are interested, also looked [...]

bgm - Item number: BGM12OR16N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Motor> Gearbox> Seals Other customers who are interested in O-ring 16 × 2,5mm - BGM ORIGINAL- used for kick starter shaft Vespa V50, PV125, ET3, PK, PX, T5 125ccm, Cosa, Rally, Sprint, TS, GT, GTR, Super, GS160 / GS4, [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

bgm - Item number: SC4010 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Frame> Tank> Seals Other customers who are interested in sealing sight glass fuel tap -BGM ORIGINAL 26.5x35x4mm- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]

bgm - Item number: BGM0223S25 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 2.5mm are interested, also searched for: Spacer | Cylinder base | Distance seal | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

LED taillight for Piaggio TPH, NRG 1. Welcome to the 21st century! With this taillight you are in the right place. Super bright and quickly responding LEDs ensure a super fat look. The high-quality clear glass also ensures a super subtle and appealing rear. Of course with E-marking and therefore completely legal. bgm - Item number: BGM5008LED [...]

Lambretta cylinder base gasket with a thickness of 2,5 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

bgm - Item number: BGM2246 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Motor housing> Stud bolts Other customers who are interested in stud bolt set Lambretta engine cover -BGM ORIGINAL- LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP are interested, also searched for: stud bolts | Set | [...]