The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

Polrad BGM Pro Electronics - for conversion to fully electronic CDI ignition The BGM PRO pole wheel is a very high quality reproduction of the original Piaggio PK pole wheel that is no longer available. We have invested in brand-new molds and can therefore now offer the popular pole-changing pole wheels in fantastic quality at a very fair price. FEATURES Weight smallframe [...]

bgm - Item number: BGM45891 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake pads -BGM 76,8 × 41,8, 96,9 / 41,2 × 125mm- BENELLI Caffe Nero 150/125 (from left), Macis 150/3, HYOSUNG MS250 125 ie, KEEWAY Outlook 50, KYMCO Vitality 2 125T, Like XNUMX, [...]

Complete BGM PRO rear brake cable with a strong Ø3mm inner cable diameter (Innocenti factory specification) and pressed cable holder on the outer shell. PROBLEM Ex works, the original cable often has play in the abutment, which means that it is not exactly at an angle to the cable stop. It is only pulled into position by the increased tensile stress during the braking process. This eats up a good part of the braking performance [...]

Ignition coil -BGM PRO- Peugeot 50-100ccm, Honda 50ccm, Kymco 50ccm. bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage is [...]

Stud BGM Original for the gear lever / crankcase of the Vespa 80-200ccm largeframe engines. Made of high tensile strength steel with a rolled (rolled) thread. In contrast to a cut thread, the surface is firmer and the thread flanks are press polished. This results in a highly resilient and permanently durable thread. Tightening torque M7: 13-18Nm Scope of delivery: 6x stud bolts M7x50mm bgm - Article number: BGM2750S Availability: [...]

Lambretta bgm PRO MRB RaceTour membrane piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 195 cylinder to diaphragm control and have a durable [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM6412FB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frames> Cables> Cables Other customers who want front brake cables -BGM ORIGINAL- Vespa PX ( -1984) - black, also looked for: Brake cable | Brake cable | Brake cable | Front | Shell | [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Chrome-plated tank cap that is lockable. Suitable for almost all Vespa models from 1948 to 1984. Exceptions are the Rally and SS180 / GS160 models that have a longer arm. Included. 2 Keys. Great quality. Like the original cover, it can be hung with bolts and then opened. (US) bgm - Item number: 5250034 Availability: in stock (Please check [...]