Conversion wiring harness for retrofitting to: PK alternator or PK motor in 50N special with indicator (angular steering head) The conversion to a more modern alternator / ignition type is a tried and tested means to be on the road more permanently and safely. The non-contact CDI ignitions are almost indestructible and reliable, as is the light output with a modern, regulator-supported, on-board electrical system.

Very nice and heavy quality. Replaces countless special tools that only fit on one model at a time. bgm - Item number: BGM8800 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Motor> Clutch> Tools Other customers who are interested in clutch holder / flywheel holder -BGM ORIGINAL Ø = 90 -125mm- all automatic scooters are interested, looked [...]

The EX5 air filters are the inconspicuousness in person. The hard plastic shell ensures a pleasant and discreet suction noise. The foam filter insert offers an enormous air throughput with a great filter performance. To be on the safe side, you should choose a 7-10% larger main jet. The tried and tested EX5 is extremely solid. Another highlight is the infinitely variable adjustability. So you can [...]

Adjustment screw set, suitable for the derivatives of the Keihin PWK carburetors with small body (24mm - 26mm - 28mm - 30mm) from Stage6, Motoforce, Koso, OKO, etc. Contains both the air screw and the idle screw. Incl. the springs and O-rings / seals behind it. Attention: The idle screw of this set has an M4 thread, therefore not suitable for original [...]

Two-part series resistor set with 10 watt resistance. This makes it possible to reduce the excessively high frequency after installing LED indicators. So LED indicators can be used without a special LED indicator relay. The set is ready-made so that it can be used in parallel in the indicator cable. The resistor is connected as if you were [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Cylinder head gasket -BGM PRO- 1,5mm Malossi 139ccm & 166ccm bgm - item number: 3820046 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers, who are interested in spacer cylinder head -BGM ORIGINAL Malossi 139/166 ccm- Vespa PX80, PX125, PX150 - 1.5mm, were looking for [...]

Disc brake made in Germany with braking torque support (Antidive). This effectively prevents the annoying bottoming out when braking. This means that the large braking force of the disc brake can be used optimally. The Antidive also enables the assembly of softer fork springs, as these no longer have to absorb a bottoming out due to the high braking torque. This improves driving behavior and comfort [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

bgm - Item number: BGM2292B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Handlebars> Throttle cable pulleys Other customers who are interested in cable pulley -BGM Pro made by JPP , QUICK ACTION, aluminum CNC- Lambretta LI (series 3 from 1966), LIS (from 1966), SX, [...]

BGM PRO Double Layer Filter made by Marchald for Polini CP carburettors Extra short air filter especially for the popular CP carburetor series from Polini. With a depth of just 30mm, it is perfectly suitable for Vespa Wideframe or laminated boards. The 55mm version is also a very nice option for Vespa Smallframes. Form specially manufactured for BGM especially for the CP [...]

bgm - Item number: BGM7929TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Tools Other customers who are interested in castellated wrenches clutch nut -BGM ORIGINAL- Vespa Largeframe ( up to 1995), also searched for: Crown nut wrench | Coupling nut | Crown nut wrench | Clutch tool | Wrench | [...]