bgm - Item number: BGM1220MAP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Seals> Seals Other customers who are interested in sealing crankcase / fan wheel housing -BGM PRO silicone- Lambretta LI. LIS, SX, TV (Series 2-3), DL / GP 125-200 are also interested in: Seal | Crankcase | Fan wheel housing [...]

Clutch basket BGM PRO Superstrong 2.0 ULTRALUBE Extremely resilient clutch, very easy to use - Made in Germany The Superstrong 2.0 CR clutch combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC machined clutch basket has excellent concentricity and extremely high torsional rigidity. This offers [...]

Lambretta bgm PRO MRB RaceTour piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

bgm - Item number: BGM8010RN46 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Gearbox> Sprockets Other customers who are looking for rear sprockets -BGM PRO Superstrong- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP - 46 teeth are interested, also looked for: pinion [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM6010S26 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,60mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: 7675166 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in insulating tubing for cable lug round plug-in sleeve 4mm Ø = 0,5 -1,0mm²- 10pcs. interested, also searched for: insulating tube | Bougie ear | Grommet | Cable grommet | Conduit | Conduit | Cable conduit | [...]

Solid 4 piston caliper with radial attachment. Two-part CNC milled housing made of high-strength aluminum, anodized. With 4x25mm pistons, the caliper has 40% more piston area than a conventional two-piston caliper with 30mm pistons. The hydraulic transmission ratio is greatly improved and the braking force (with the same lever force) increased. Another advantage of the 4 piston technology is the symmetrical loading [...]

Cylinder head gasket -BGM PRO- 2.0mm Polini 177ccm, DR 177ccm bgm - item number: 3820054 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]