Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

England was the only market where Lambretta sales outpaced Vespa sales. The main reason for this is the excellent marketing strategy of the Lambretta Concessionaires. The success story of the Lambretta is documented extensively and in great detail in Stuart Owen's book about the Lambretta Concessionaires (Article No. 3332513). In addition to special models and special color combinations, there was also the Pegasus bench. The was [...]

Clever maneuvering aid for all classic Vespa and Lambretta scooters. Perfect for moving the vehicle quickly and easily in a tight garage. Simply place the maneuvering aid under the scooter and jack it up with the main stand. Now the scooter can easily be maneuvered into every corner without any effort. In width [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM ORIGINAL stud bolt for fastening the cylinder and cylinder head to the engine housing SUITABLE Suitable for Vespa largeframe engines from 160ccm displacement (ex works), e.g. Vespa PX200, Rally180 / 200, GS160, SS180, Cosa200. Can also be used in the engines of the Lambretta series 1-3 models. SPECIAL FEATURES ROLLED THREAD The thread of the cylinder stud bolts is rolled, not cut. The BGM ORIGINAL [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM66060P3 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- Type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 3 plug contacts are of interest, also looked for: Plug | Cable | Ignition stator | [...]

You can use the pins to block the clutch bell in order to loosen the clutch nut. The large nut of the coupling can be removed with the inner hexagon key. bgm - Item number: BU5476 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,26 kg Category: Motor> Clutch> Tools Other customers who [...]

Cylinder base gasket -BGM PRO- 1,5mm Polini 177ccm bgm - item number: 3820041 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Polini / Parmakit 177 ccm- Vespa PX80, PX125, PX150 - 1.5mm, searched [...]

bgm - Item number: BGM2109T Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in flywheel holder -BGM PRO Electronics- Lambretta LI, LIS, SX, TV, GP, DL - motor bolts 29cm are of interest, also searched for: flywheel holder | Holder | Special tool [...]