These are our BGM PRO Superstrong Lambretta front brake cables. They have a strong Ø2,5mm inner cable diameter and a firmly pressed cable holder on the outer shell. Both improve the braking process considerably. Innocenti made a similar modification in May 1966 with the last models of the DL series which were equipped with a disc brake. The cable thickness has also been increased. [...]

Gasket set cylinder Minarelli 50 AC vertical bgm - Item number: R100689000 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Seals> Gaskets Other customers who are interested in gasket set cylinder - BGM ORIGINAL 50 cc- Minarelli 50 cc AC (vertical) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfect for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for the on-board electronics of two-wheelers.

bgm - Item number: BGM79N06 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Fork> Nuts Other customers who are looking for a headset lock nut h = 6mm -BGM ORIGINAL- Vespa 125 VN1, VN2, VNA1T, VNA2T, VNB1T, VNB2T, VNB3T, VNB4T, VNB5T, VNB6T, Vespa 150 VL1, VL3T, VB1, VBA1T, VBB1T, [...]

bgm - Item number: BGM6010S18 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 1,80mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

The bgm multitool tool bgm8819 contains three tools in one: Pole wheel puller (M28x1 external thread) Clutch puller (M26x1 internal thread) Clutch compressor The pole wheel puller (M28x1) fits all Vespa with electronic ignition (exception Vespa Rally200 Femsatronic and PK automatic), including our ignitions for retrofitting the Vespa Sprint / VBB and V50 / Primavera as well as the Malossi VesPower ignitions. Also suitable is this [...]

bgm - Item number: BGM1550H Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,31 kg Category: Engine> Cylinders> Cylinder heads Other customers who are interested in cylinder head -BGM PRO 150 ccm, wideframe , Faro Basso, Ø = 57mm, stroke = 57mm- Vespa 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T are also looking for: [...]

The LEDs for the rear lights and indicators slumber peacefully under the clear glass. Once switched on, you will no longer recognize your runner. The super bright diodes make for a worryingly aggressive look. Everything else can wrap up! bgm - Item number: BGM5015WL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: [...]

Brake pads -bgm Pro-. Among others for the following models: Derbi Vamos (v) Italjet Formula 50 97- (v + h) Dragster 50 (v + h) Peugeot Elyseo 50 (v) Speedfight 50 LC (v + h) Squab (v) Zenith (v ) Suzuki Katana (r). Sintered brake pads are a new generation of pads. They are all-metal brake pads that are manufactured in a complex sintering process. With these [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]