Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM hoses are manufactured according to our specifications especially for the needs of Vespa and Lambretta scooters. The butyl content is over 55%, which makes them extremely airtight and absolutely reliable. The high butyl content makes the hose expensive to manufacture, but in our opinion the result justifies the effort. The valves are in model-specific [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. The size M7x25mm is suitable for use as an adjusting screw for the rear brake cable on the engine.

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

Small upgrade kit for the primary transmission of all PV125, ET3, PK80-125 S / XL / XL2 motors. The set massively strengthens the primary drive, making it durable for powerful engines. The massive CNC-milled cover disc effectively prevents the thin standard discs from breaking through and thus holds the shock absorber springs in place. Also available as a large upgrade kit with [...]

Our tuning fan wheel not only looks good, it also cools your engine better. This makes it ideal for tuned engines. Of course, it also looks great on standard engines. The bgm PRO Racing is also lighter than the series part. Due to the lower centrifugal mass, the engines hang more poisonously on the gas and can turn further. Technique tip: [...]

The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]

This practical bgm Pro dosing bottle fulfills two tasks: on the one hand it serves as a storage container for amounts of up to 500 ml and at the same time small amounts can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower body of the bottle and has graduation marks in 5 ml increments up to 25 ml.

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: 7674074 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Crankshaft> Shim washers Other customers who are looking for a Shim -DIN 988 similar- 31x26x1,0mm (used for ball bearing 6305), also searched for: Shim | Shim | Centering washer | Bearing washer | Ball bearing washer | [...]