The bgm PRO Sport silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. Compared to the bgm PRO Touring silent rubbers, this version is much tighter and therefore perfect for precise handling and quick changes of direction at high speed. With the reinforced bgm motorized rubber rubbers supplied in pairs, the chassis gains directional stability, steering precision and [...]

bgm - Item number: BGM0292HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 1.0mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

The Fast Flow petrol taps have a high flow rate and ensure a perfect supply of fuel to the carburetor even on powerful engines. They can be exchanged 1: 1 for the original fuel tap. The version shown here shows a special version for wideframe with the petrol outlet in the direction of travel to the right. The functionality corresponds to that of a conventional [...]

The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets. Regulated direct current output for the horn (12V DC) 12V USB charging output with up to 3A charging power 12V flasher relay [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output due to maximum number of windings Proven excitation coil with copper plate for maximum reliability Pickup with [...]

bgm - Item number: SC5012 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Rubber parts> Rubber parts Other customers who are interested in rubber hose for cable ignition base plate -BGM ORIGINAL- Vespa PK interested, also looked for: rubber hose | Cable | Ignition stator | Hose | Cable rubber | Ignition rubber [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The BGM PRO ignition set made of high-quality components for a double conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit as well as a reinforced crankshaft of the Vespa PK XL models. This set is for the Vespa Smallframe models with a small generator cone. This includes all V50, 50N, SS50, SR50, SS90, V90, 90 Racer, V100, PV, ET3, [...]

BGM Pro Sport bench made by Nisa Italy Based on the very popular Nisa 'Sport 20' bench, we had a BGM version made by NISA. AUTHENTIC LOOK The BGM Pro Sport bench has a beautiful Alfatex cover (embossed waffle pattern) on the sides and back and is also available with gray piping. The seat is also [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM12OR119N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Motor> Coupling> Seals Other customers who are interested in O-ring 119 × 2,00mm - BGM ORIGINAL- used for clutch cover Vespa PX, T5 125cc, Cosa2, Vespa Rally, Sprint150, TS125, GT125, GTR125, Super, SS180, GS160 / GS4, [...]

bgm PRO MRB cylinder head for pistons with 70-71 mm diameter. The head is CNC milled from solid material in Germany. The area of ​​the cooling fins is significantly increased compared to the Italian, Indian, Spanish and most other heads. This leads to significantly higher heat dissipation and better cooling. The head is warp-proof with extra [...]