Rear brake drum 8 "incl. Brake shoes, 1 mount -BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, VBA1T, VBB1T, VNB2T, VNB3T, VNA, ACMA, Hoffmann rear brake drum "Made in Germany" by Strohspeed for BGM PRO. Suitable for all Vespa models with 8 inch tires and a brake pad bolt, eg Vespa Wideframe V1-15, V30-33, VU, VM, [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Disc brake made in Germany with braking torque support (Antidive). This effectively prevents the annoying bottoming out when braking. This means that the large braking force of the disc brake can be used optimally. The Antidive also enables the assembly of softer fork springs, as these no longer have to absorb a bottoming out due to the high braking torque. This improves driving behavior and comfort [...]

High quality cast aluminum cylinder with a very resistant Nikasil coating. Aluminum is thermally superior to conventional gray cast iron because it emits the heat generated by the combustion process in the cylinder much better. It is not for nothing that all high-end cylinders are made of this material. A material that withstands such extreme loads as occur in the high-end sector, [...]

bgm - Item number: BGM2105U4DP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust manifold -BGM PRO Clubman V4.0- Lambretta series 1-3 - unpainted interested, also looked for: exhaust manifold | Elbow | Exhaust flange | Exhaust manifold | [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

Lambretta cylinder head gasket with 1,0 mm thickness and 65,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0240 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Universal tank including fuel tap and approx. 90cm fuel hose. Ideal for the workshop to test vehicles without a tank or removed engines. The valve is designed as a ball valve and has two 'closed' and one (central) 'open' positions. This means that in the event of an emergency, the fuel flow is always safely and quickly interrupted without having to press the lever position of the [...]

bgm - Item number: 7900056 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburettor> Carburettor components Other customers who are interested in mixture adjustment screw -BGM PRO for PWK- (bgm, Stage 6, Keihin), PWM38, also looked for: mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller | Co2 [...]