bgm - Item number: 3333226 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Shock absorbers> Screws Other customers who are interested in screw rear shock absorbers -BGM ORIGINAL- M9 x 70mm extra long, AF14, galvanized- used for YSS / BGM PRO SC shock absorber / engine - Vespa V50, PV, ET3, [...]

The power and torque values ​​of so-called smallframe motors that are now possible have increased significantly in recent years and seem to be growing steadily. Power and torque values ​​of well over 35PS / 30Nm can be found more and more frequently. As a result, other components are of course also stressed significantly more. An important and highly stressed link between the crankshaft and the gearbox is [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

Spare part at a great OEM level! bgm - Item number: R25927 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,28 kg Category: Motor> Gearbox> Pulleys Other customers who are interested in pulley -BGM ORIGINAL- Piaggio 50 ccm 2 -Takt (from 1998), also searched for: pulley | Fan wheel | V-belt pulley [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

Mark Broadhurst has incorporated his experience from several decades of Lambretta tunings and over 1.700 tuned two-stroke cylinders into the development of the RaceTour cylinders. The cylinders are available with 195ccm (65mm bore) for the small engine case with 125-175ccm and with 225ccm (70mm bore) for the 200ccm engine case. The cylinders offer significantly increased performance and [...]

Tuning cylinder 150ccm BGM PRO suitable for Vespa VM, VN, VB1, VGL1, VL1 BGM PRO cylinder with 150ccm with 57 mm stroke suitable for all 2-channel engines. The cast iron cylinder has three transfer ports and is suitable for all wideframe motors with a 57 mm stroke. The cylinder with the 125 mm crankshaft fits on the 54 cc engines with 57 mm stroke.

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

bgm - Item number: BGM6398UB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.6 mm x 2500mm, sleeve = 2200mm, nipple Ø = 5.5mm x 7.5mm, inner sleeve PE, black- used as a shift cable are interested, also looked for: [...]

Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]

Developed for performance-oriented engine concepts. The fastening should be done with Loctite medium strength WITHOUT a locking plate. The recommended tightening torque is 55-60 Nm. Tried and tested in racing and found to be good. bgm - Item number: 7672106 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Crankshaft> Nuts Other customers, [...]