bgm - Item number: BGM5342 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake shoes -BGM PRO Ø = 135x16mm- Piaggio Boss, Piaggio Boxer, Piaggio Bravo, Piaggio CBA, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Piaggio Superbravo, Piaggio [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

England was the only market where Lambretta sales outpaced Vespa sales. The main reason for this is the excellent marketing strategy of the Lambretta Concessionaires. The success story of the Lambretta is documented extensively and in great detail in Stuart Owen's book about the Lambretta Concessionaires (Article No. 3332513). In addition to special models and special color combinations, there was also the Pegasus bench. The was [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Everyone knows the problem, the original translation is simply too short for tuning cylinders. The cylinder rotates dead or the power is not converted into speed properly. The bgm PRO primary wheel can quickly help. Without having to split the engine. Even the clutch basket does not have to be dismantled to use the original pinion (15 teeth) of all [...]

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

Steering tube BGM PRO Vespa PK XL2 - modified for use on Vespa Largeframe (around 1961-1979) e.g. Super 125/150, Sprint150, Rally180 / 200, GT / GTR125, TS125 Motovespa DS200, Sprint / GS150 (04C), GT160 (09C ) PROBLEMS OF THE OLD ORIGINAL FORKS The forks of the old Vespa largeframe models have antiquated damping and suspension kinematics. Due to the design, the chassis hits quickly when braking hard ('goes [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]

The bgm Pro clutch pressure plates are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the plates extremely resistant to wear. The plates are then precisely sanded, so that the pressure pad with a flat and hard surface finds perfect working conditions. The pressure plates are manufactured exactly according to Piaggio original dimensions. Always [...]

Cover plate to close the opening for the electric starter in the air duct of the motor housing of the PX, T5 and Cosa models. Useful if the electric starter is removed or is not available. This means that no valuable cooling air is lost. bgm - item number: 7671454 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

bgm - Item number: BGM7752B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,69 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in rear shock absorbers -BGM PRO SC / R1 SPORT , 360mm- Vespa Primavera 125, Vespa Primavera 150, Vespa Sprint 125, Vespa Sprint 150 - black are interested, searched [...]