The bgm EVOLUTION crankshafts are very cleanly processed and convince with well thought-out details: performance-optimized full-beam design well balanced (special balancing that is only available with the BGM PRO shafts) stable connecting rod available with 52mm (std.) And 55mm stroke The long stroke version with 55mm stroke has a longer connecting rod (110mm instead of the 105mm series). This ensures [...]

Hammer clear glass indicators and thanks to E11 marking fully legal. The oval BGM universal indicators come with a stylish chrome cover. Thanks to their compact design, they can be installed discreetly almost anywhere. The installation depth is approx. 50 mm. The width about 30 mm and the length about 65 mm. bgm - Item number: BGM5037 Availability: in stock (Please check availability [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Replacement bolts for BGM PRO stainless steel rims. Has a square to prevent rotation. 4 bolts are required for laminated panels. 5 bolts are required for Vespa rims. Scope of delivery without nut / snap ring. We recommend the stainless steel cap nut set (BGM7992) bgm as a supplementary set - item number: BGM79VA Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: [...]

Should be replaced with every exhaust change to be on the safe side. Otherwise, false air can be drawn through the outlet and there is a risk of cylinder damage. bgm - Item number: 8006001 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Gaskets Other customers who are interested in Gasket exhaust -BGM [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

BGM Pro Sport bench made by Nisa Italy Based on the very popular Nisa 'Sport 20' bench, we had a BGM version made by NISA. AUTHENTIC LOOK The BGM Pro Sport bench has a beautiful Alfatex cover (embossed waffle pattern) on the sides and back and is also available with gray piping. The seat is also [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]

bgm - Item number: BGM6412CC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Frames> Cables> Cables Other customers who are interested in clutch cable -BGM ORIGINAL- Vespa PX (- 1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), GT125 (VNL2T), GTR (VNL2T), TS125 (VNL3T), GL150 (VLA1T), GS160 / GS4 [...]

If the mirror holes in the handlebar trim of the GTS models from 2016 are to be closed, this is difficult to implement due to the uneven trim in this area. The specially manufactured cover caps from BGM PRO are an optical and technically first-class solution. These are made of the same material as the handlebar cover and exactly follow the design.

The BGM PRO assembly kit for handlebar end mirrors can be used universally for all motorcycles and scooters. With the adapter, a handlebar end mirror can be mounted quickly and easily. No modifications to the fittings or the handlebars are necessary. (Vehicles whose rubber grips are still closed at the end can be equipped with open grips or, alternatively, the existing grips with [...]