bgm - Item number: BGM8310L Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutches Other customers who are looking for Spacer clutch cover -BGM ORIGINAL- Vespa 125 , VN1T (60001-), VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 150 GL (1956-1958) - Ø = 130 × 1.5mm are of interest, [...]

The bgm PRO Racing shaft with 51 mm stroke is perfect for class 1 of the ESC and people who need a stable shaft for ambitious road tuning. The proven crank webs of the 54 mm shaft are used here. The larger cheek diameter was retained here to provide the necessary, higher overlap on the crank pin and thus additional [...]

Latest version of the proven BGM ORIGINAL ignition base plate for electronic ignition. BGM has revised the BGM original ignition base plate, which has proven itself a thousand times over, and made it even better. Particular attention was paid to the very high quality of the bobbins and the pickup. In addition, the cabling was converted to textile-coated silicone lines. The advantages that result from this compared to conventional PVC [...]

bgm - Item number: BGM6475TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 5mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM PRO silicone engine gasket set for Vespa Largeframe 2-channel engines 1959-1969 Sprint150 (VLB1T), GT125 (VNL2T), GL150 (VLA1T), Super125 / 150 (VNC1T / VBC1T), VNB, VBA, VBB The BGM PRO silicone engine gasket set is specific suitable for engines of the so-called large frame models between year of construction 1959-1969. These vehicles can be recognized by the removable side panel (with rubber seal) on the engine side and a carburetor in the [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The pistons of the BGM177 cylinder are manufactured by the renowned Italian piston manufacturer METEOR. The piston has a high silicon content. As a result, it has less thermal expansion, is more wear-resistant and thermally very stable. PISTON RINGS Two 1mm thick piston rings, also made in Italy, minimize friction and thus increase performance and speed stability. Otherwise they are identical [...]

bgm - Item number: BGM8010RN46 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Gearbox> Sprockets Other customers who are looking for rear sprockets -BGM PRO Superstrong- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP - 46 teeth are interested, also looked for: pinion [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]