High quality petrol hose made for us in Italy by the manufacturer of the original Piaggio petrol hoses. Perfect for all Vespa scooter models such as Vespa PX, Sprint, Rally, VBB as well as V50, PV, ET3, PK etc. suitable. Inside diameter: Ø7mm Outside diameter: Ø14mm Length: 750mm The large outside diameter ensures a perfect seal in the rubber grommets in the frame. Additionally [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

Complete set of 4 with colored indicator glasses. This is how you skillfully set highlights on your scooter. bgm - Item number: BGM5096 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,35 kg Category: Frame> Electronics> Indicator glasses Other customers who are interested in indicator glasses -BGM ORIGINAL set of 4- Aprilia SR 50 R [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM end sleeves are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old original from Piaggio. This guarantees a perfect fit. End sleeves have a thin shoulder at the end. They are required to fix outer cable shells in the sheet metal of the abutment (in the steering head) to prevent slipping and

The bgm Pro kick starter pinions are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. They are manufactured exactly according to Piaggio original dimensions. Always consistently high quality. No compromise. LUBRICATION GROOVE As a special feature, the bgm Pro pinions also have a lubricating groove in the [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1204TL Availability: in stock (Please check the [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

bgm - Item number: BGM8880A Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Workshop requirements> Tools Other customers who are interested in hook wrenches for shock absorbers -BGM PRO- for Ø = 45mm interested, also searched for: hook spanners | Hook | Stretcher

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]