The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

The bgm PRO Superstrong is the plug n play coupling solution for small frames - Made in Germany. Special features: Ready-to-install 4-disc clutch with organic racing pads Spring force (springs BGM XL) designed for up to 22HP / 20Nm Separates perfectly cold and warm Easy to use No changes to the cover / housing necessary Without keyway (half-moon wedge) Manufactured and assembled in Germany Delivered ready for installation [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI24 / 24 E Dell'Orto / Spaco carburetor. This will be revised by us so that it also meets the high demands of a heavily modified engine. In order to meet the increased fuel consumption of a tuned engine, the carburettor was optimized and a modification was made to the through-hole between the shimmer chamber and the nozzle holder.

Nice spare part that enhances every restoration. Complete with screw and kick starter rubber. Aluminum bgm - Item number: 5050021 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,26 kg Category: Motor> Gearbox> Kickstarter Other customers who are interested in Kickstarter Vespa Sprint150 (VLB1T), Sprint Veloce, GT125 (VNL2T), GTR125 (VNL2T), GL150 [...]

bgm - Item number: 3332368 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug - flat receptacle 90 ° angle 6,3mm Ø = 0,75-1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

bgm - Item number: BGM0903EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 70mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The material is spared. Used to mount the inner needle bearing (facing the wheel) of the front brake anchor plate of the Vespa PX, T5, Cosa and PK models. [...]

The BGM BigBox Sport - the wolf in sheep's clothing Performance like a racing exhaust - optics & acoustics like a standard exhaust The BGM BigBox Sport is a thoroughbred Vespa racing exhaust with the unsuspecting design of an original exhaust. Like the original Vespa exhaust, the BigBox is of course double-walled and provided with insulating wool. It positions itself as a clear [...]

The PickUp, like a Hall sensor in a car, is responsible for the correct ignition timing. It gives the CDI the signal when it should trigger the ignition signal. Inside the PickUp there is a coil with very fine copper wire windings. This induces a voltage during the rotation of the magnetic pole wheel. As soon as the area of ​​the so-called [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

Corresponds to the original spare part, so in the very best quality. Great replacement for anyone struggling with problems caused by a defective old stator plate. bgm - Item number: SR1630851 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Ignition> Ignitions Other customers who are interested in [...]