bgm - Item number: BGM6412TC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Frames> Cables> Cables Other customers who are interested in throttle cable -BGM ORIGINAL- Vespa PX (- 1984) - interested in black, also looked for: throttle cable | Throttle cable | Throttle rope | Throttle | Control | Cable [...]

The BGM Pro exhaust manifold is made of stainless steel and therefore rust-free forever. It replaces the original Piaggio manifold 1: 1 and is characterized by its good fit (made in Europe). A connection for the lambda probe is available as with the original. If necessary, insert this on the thread with a little copper paste. ORGINAL AND SPORTS EXHAUST The manifold is [...]

bgm - Item number: 1083608 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Rubber parts> Bushings Other customers who are interested in bushing silent rubber shock absorber / motor -BGM ORIGINAL ( Made in Germany) Ø = 9mm x 48mm- Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, [...]

The main shaft of the GS 160 and SS 180 is held by such a castle nut. Wedi seat 40mm. bgm - Item number: BGM5440 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are interested in castle nut rear wheel bearing- BGM Original -VESPA Øi = 40mm, [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

Universal fuel tap (hose fuel cock) for fuel hoses with 6 or 8 mm inner diameter. Impressively simple fuel tap solution! bgm - Item number: 8006601 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM ORIGINAL- universal hose fuel tap - Ø = 8mm interested, looked [...]

bgm - Item number: BGM0901E Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust spring -BGM ORIGINAL- stainless steel - 55mm interested, also looked for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer | [...]

bgm - Item number: 3333148 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Motor> Motor housing> Spacer Other customers who are interested in spacer fan wheel cover -BGM PRO- V50 1. Series (V5A1T1001 -92876, V5SA1T1001 -15325) - 3.00mm are interested, also looked for: Fan wheel cover | Flywheel cover | Cooling wheel cover | [...]

BGM hoses are manufactured according to our specifications especially for the needs of Vespa and Lambretta scooters. The butyl content is over 50%, which makes them extremely airtight and absolutely reliable. The high butyl content makes the hose expensive to manufacture, but in our opinion the result justifies the effort. The valves are in model-specific [...]