Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

SILENT RUBBER BGM PRO FOR MOTOR HOUSING MOTOVESPA The motor housings of the Motovespa largeframe models have their own type of silent rubber for the motor crossbar. The dimensions of the BGM PRO silent rubbers correspond completely to the original Motovespa crossbar rubbers that are no longer available. Replaces 1: 1 the original Motovespa silent rubbers in the motor housing (front) Set for left and right side Comfortable rubber compound with [...]

abc W 01 2,46 0,60 24,00 W 03 2,48 1,40 20,00 W 04 2,48 1,40 18,00 W 05 2,46 1,40 18,00 W 06 2,50 1,00 24,00 W 07 2,50 1,40 18,00 W 08 2,50 1,40 16,00 W 09 2,50 1,40 20,00 W 10 2,50 1,80 16,00 W 11 2,50 1,80 18,00 W 12 [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Disc brake made in Germany with braking torque support (Antidive). This effectively prevents the annoying bottoming out when braking. This means that the large braking force of the disc brake can be used optimally. The Antidive also enables the assembly of softer fork springs, as these no longer have to absorb a bottoming out due to the high braking torque. This improves driving behavior and comfort [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Tuning kit to convert PX125 / 150 (and similar) engines to 177ccm. The set includes: cylinder kit BGM Pro 177 exhaust BGM Pro touring carburetor SI24 BGM Pro main jet set It is intended to obtain the best possible combination of power, torque and service life based on the series engine. The set can be used without further adjustment work (no milling, turning or grinding necessary).

The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 28.5 / 28.5mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]

Suitable for suspension strut BGM7789NB. bgm - Item number: BGM7789NBASP Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Shock absorbers> Springs Other customers who are looking for shock absorber springs rear, soft, black -BGM PRO SC / R12 COMPETITION- Vespa GT, GTL, GTV, GTS 125-300 (all years of construction) are interested, also searched [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

bgm - Item number: BGM6413SC Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Frames> Trains> Speedometer cables Other customers who are interested in speedometer cables -BGM ORIGINAL- Vespa PX Lusso (from 1984), PX My, PX Disc, PX 2011, T5ccm, Cosa 125, Cosa 200, PK50 S [...]