bgm - Item number: BGM5037YLN Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,62 kg Category: Frame> Electronics> Taillights Other customers who are interested in taillights -BGM ORIGINAL clear glass LED with indicator function- Gilera Runner (from 2006), DNA - black, also looked for: taillight | Rear lamp | [...]

bgm - Item number: BGM66060P6 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- Type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 6 plug contacts are of interest, also looked for: Plug | Cable | Ignition stator | [...]

bgm - Item number: BGM2105NCF Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust flange -BGM PRO Clubman V2-V3- V4- Lambretta series 1-3 - type gray cast iron are interested, also looked for: exhaust flange | Flange | Elbow | Outlet port | [...]

Lambretta bgm PRO MRB RaceTour piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

bgm - Item number: BGM6490X Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,70 kg Category: Frames> Wheels> Clamping nipples and screw nipples Other customers who are interested in rear brake cable clamping plates -BGM ORIGINAL- Lambretta D (1953-), LD (1953-), E, ​​F, LI, LIS, SX, TV, DL, GP - 10 pieces [...]

BGM High Ease spark plug connector. True to the motto -Less is more- designed spark plug connector. Sits very tightly on the spark plug and consists of so few parts that nothing can get loose. For spark plugs with screwed-on nipple bgm - item number: 3309006 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx .0,01 [...]

If the mirror holes in the handlebar trim of the GTS models from 2016 are to be closed, this is difficult to implement due to the uneven trim in this area. The specially manufactured cover caps from BGM PRO are an optical and technically first-class solution. These are made of the same material as the handlebar cover and exactly follow the design.

bgm - Item number: BGM6710W Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,40 kg Category: Frame> Electrics> Vehicle electrics Other customers who are interested in adapter cable set for horn rectifier -BGM PRO- used for BGM6710, also looked for: Horn rectifier | Horn regulator | Horn transformer | Rectifier | Diode | Diodes [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

bgm - Item number: SC2302 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetors -DELLORTO 16 / 15mm, 16 / 16mm SHB- Vespa PK50 XL2 are interested, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber [...]

Anodized graduated disk to determine the timing of all 2 strokes that have a crankshaft with a 10 or 12 mm thread. This applies to all Lambretta, Vespa and automatic systems, regardless of whether they are 50-80 cc or Maxi engines. All milling work on the cylinder ducts influence the control times, ie how long the ducts are open and thus the [...]

Oil can holder BGM PRO as a nice add-on for spare wheel holder in the leg shield / passage of Vespa and Lambretta The ideal place for a vintage oil can made of sheet metal (e.g. BGM3000 or BGM3000EC). The oil can holder is simply screwed onto the spare wheel holder and / or the spare wheel itself. With Vespa PX / LML it can also be used under the left side panel (if necessary, move the battery / horn rectifier). Attachment of the oil can eg [...]