When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

Complete set to match your indicators and the taillight perfectly to the look of the scooter. With a few, easy-to-use hand movements, you get a great look! 4 indicator glasses + rear light glass in WHITE! bgm - Item number: K070193 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,43 kg Category: [...]

Lambretta cylinder base gasket with a thickness of 1,5 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM Pro Spezial crankshaft bearings with narrow shoulder width for Vespa Wideframe engines These bearings should be used if the high-quality Corteco shaft sealing rings are to be installed at the same time. The Corteco shaft seals have a greater material thickness than the previously common shaft seal carriers (0.8mm instead of 0.5mm sheet metal thickness). The narrower bearing shoulders of the BGM PRO bearings compensate for the thicker sheet metal [...]

Lambretta cylinder base gasket with a thickness of 2,5 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482S Availability: in stock [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Complete replacement piston kit. bgm - Item number: 5660048 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Cylinders> Pistons Other customers who are interested in pistons -BGM ORIGINAL- Piaggio 50 ccm - 40,0mm interested, also searched for: Pistons | Cylinder piston | Piston | Pistone | [...]

BGM 50ccm replacement cylinder. Replacement for all water-cooled Peugeot Jet Force from 2013 and Speedfight 3 and Speedfight 4 scooters. The BGM cylinder is delivered in a kit with piston, piston rings and sealing kit. The original cylinder head from the Peugeot Speedfight 3 & 4 LC and Jetforce C-Tech can still be used. Replaces the Peugeot OEM number T 777327 [...]

bgm - Item number: BGM1550OR Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinders> Seals Other customers who are interested in O-ring cylinder head for BGM1550H -BGM PRO 150 ccm, Wideframe, Faro Basso, Ø = 57mm, stroke = 57mm- Vespa 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T are interested, searched [...]

Noble BGM PRO aluminum cover for the engine cover of Vespa GT, GTV, GTS (until 2019), LX, S, ET4 Cover for the coupling nut of the Vario cover on the left side of the vehicle. This is centrally located in the field of vision and offers a nice opportunity to significantly upgrade the appearance of the scooter with little effort. MATERIAL & SURFACE High-strength aluminum (6061) which finally [...]