The BGM FASTER FLOW SI carburetor is based on a brand new SI26 / 26 E Dell'Orto / Spaco carburetor. With a diameter of 25mm, these already have significantly more area than a SI24 carburettor. In principle, this type of carburetor can be drilled out further, but then the guidance of the throttle valve and its sealing function are no longer 100% guaranteed. Therefore we restrict [...]

bgm - Item number: 7672702 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Frames> Cables> Cables Other customers who want universal train inside -Ø = 1,6mm x 1750mm, nipple Ø = 5,5mm x 7mm- used as a shift cable - turned interested, also looked for: Zug | Universal | [...]

Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output due to maximum number of windings Proven excitation coil with copper plate for maximum reliability Pickup with [...]

bgm - Item number: BGM79N06 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Fork> Nuts Other customers who are looking for a headset lock nut h = 6mm -BGM ORIGINAL- Vespa 125 VN1, VN2, VNA1T, VNA2T, VNB1T, VNB2T, VNB3T, VNB4T, VNB5T, VNB6T, Vespa 150 VL1, VL3T, VB1, VBA1T, VBB1T, [...]

Grip, cornering, directional stability, handling, wheelspin, braking behavior? All of these are demands that your chassis must be able to cope with. bgm offers the right damper for every application. The bgm PRO series offers you high tech at its best. You can not only adjust the spring tension of the black and white gas pressure shock absorbers to your individual needs, they also offer you [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: 7673834 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Workshop requirements> Tools Other customers who are interested in seal remover -Sealing scraper -UNIVERSAL- 23mm also looked to: seal remover | Seal remover | Seal Ex | Sealex | Sealing scraper | Triangular scraper | Seal Remove | Remove [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Cylinder base gasket -BGM PRO- 1,5mm Malossi 139ccm & 166ccm bgm - item number: 3820038 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers, who are interested in spacer cylinder base -BGM ORIGINAL Malossi 139/166 ccm- Vespa PX80, PX125, PX150 - 1.5mm, were looking for [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 34 / 34mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]