The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Chrome-plated tank cap that is lockable. Suitable for almost all Vespa models from 1948 to 1984. Exceptions are the Rally and SS180 / GS160 models that have a longer arm. Included. 2 Keys. Great quality. Like the original cover, it can be hung with bolts and then opened. (US) bgm - Item number: 5250034 Availability: in stock (Please check [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Complete ignition for all Peugeots with 50-100ccm and simple CDI. Corresponds to the original spare part, so in the very best quality. Excellent replacement part for anyone who has serious problems with their ignition. bgm - Item number: SR163537 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,21 kg Category: Engine> Ignition> Ignitions [...]

Premium quality! The side panel rubber of the PX series differs in the thickness of the rubber profile. Basically interchangeable, the so-called PX Lusso model series (from year of construction 1984) uses significantly thicker rubber side panels. Their profile covers more area, both on the side panel and on the frame. Since there are no side panel rubbers in decent quality at a reasonable price on [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Like the Italian PK XL125 models, the Indian-made SE2 motor housings can be actuated with just one (rigid) pull. However, the hole in the housing for the abutment bushing attached to the train (with which the train is supported against the housing) is larger than usual in Indian housings. Our adapter resembles the too large [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Air jet set specific for the Dell'Orto carburetor SI24 / 24G (e.g. Vespa T5). The carburettors specified with the ending 'G' have a lower overall height than those with the suffix 'E' or 'D'. For this reason, shorter auxiliary and air jets are used in the 'G' carburettor types. The T5 models almost exclusively have an air jet of size 120 ex works.

Two-part series resistor set with 10 watt resistance. This makes it possible to reduce the excessively high frequency after installing LED indicators. So LED indicators can be used without a special LED indicator relay. The set is ready-made so that it can be used in parallel in the indicator cable. The resistor is connected as if you were [...]