BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

Cylinder head gasket -BGM PRO- 1,5mm Malossi 210ccm, Polini 207ccm bgm - item number: 3820035 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Cylinder> Spacer Other customers , who are interested in spacer cylinder head -BGM ORIGINAL Malossi 210 ccm- Vespa PX200, Rally200 - 1.5mm, also looked [...]

Clutch linings are a very important link between the engine and the transmission. A well-functioning clutch is essential for driving fun, safety and performance. Unfortunately, many manufacturers do not make the appropriate effort with such an important component with the result that the clutches go through or do not separate properly. The covering manufacturers deliver the proper quality [...]

Material: The BGM crankshafts are forged like in the good old Piaggio times. During forging, the material is pressed together under high temperature and high pressure. This results in a higher density of the material. Heat is dissipated much better. The material is more resistant to distortion. This is a huge advantage compared to the crankshafts manufactured by other manufacturers whose used [...]

bgm - Item number: BGM6010S18 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 1,80mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

bgm - Item number: BGM7788SPC Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are looking for spacers for front shock absorber mount -BGM PRO- interested in SC / F16 Sport / Competition (Vespa GTS125-300, Sprint50-150, Primavera 50-150) - 0,20mm, also looked for: Spacer | Spacer plate [...]

Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Intake manifold -BGM PRO Evolution- Piaggio - CS = 23mm. Open intake manifold for all Piaggio scooters with the 50 cc engine housing. The ideal connection between the Dellorto, Gurtner and Arreche carburetors with 23 mm connection width. The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]