Lambretta cylinder base gasket with a thickness of 3,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

bgm - Item number: BGM2225HS12 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 1,2 - XNUMXmm are interested, also looked for: Spacer | [...]

The BGM Pro switch cross is a fine material for high demands. Made from high quality 15CrMo5 (SCM415) chrome molybdenum steel. The BGM gearshift cross is very robust, but offers elasticity to protect the button in the gear wheel. Better than original goods. Always consistently high quality. Can be used for all types of stress, regardless of whether touring or racer. bgm - Item number: BGM6501A Availability: [...]

Open intake manifold for Minarellis with upright cylinder Intake manifold with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values ​​and freer turning and thus higher top speed. bgm - Article number: A201 Availability: on [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

bgm - Item number: 3331530 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Gearbox> Springs Other customers who are interested in switching spring set -BGM PRO- V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL - increasingly interested, also looked for: switch spring | Set | [...]

Complete electronic ignition for Piaggio Ciao and SI The advantages at a glance: stable ignition point even at high speeds, strong ignition sparks, high luminous flux, pole wheel weight: approx. NOTE: A corresponding motor housing is required for the assembly of the ignition: Polini Speed ​​Engine (P1300) Malossi racing housing (M1700210 or M576352) bgm - item number: BGM5717514CI Availability: out of stock (Please check [...]

BGM PRO Oversize screw / clamp nipple in excellent quality, manufactured by a supplier for the Japanese motorcycle industry. The BGM PRO Oversize types have five special features: Production to oversize (Ø10.06mm) Stepped collar at the upper end With a wrench surface to hold against (SW = 9mm) With 3.5mm hexagon socket (like original Innocenti) With internal clamping plate to protect the train OVERSIZE The [...]

bgm - Item number: BGM6399UG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.9 mm x 2500mm, sleeve = 2200mm, nipple Ø = 8.0mm x 8mm, inner sleeve PE, gray - used as a clutch cable, front brake cable interested, searched [...]