Professional oil filter wrench that makes the dismantling / assembly of the oil filter cartridge much easier and safer. The tool encompasses the filter cartridge and offers a secure hold. Slipping, as with tools from other manufacturers, is reliably prevented. Heavy workshop quality No more slipping possible, even with great effort, safe to use Galvanized For 1/2 inch drive (large ratchet) bgm - item number: [...]

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

The bgm PRO membrane block comes with a powerful two-flap membrane. The GRP platelets are state of the art for optimum response behavior and high performance. In addition, the GRP plates have an extremely long service life, which means that maintenance is reduced to a minimum. The light metal block is vulcanized with rubber. This means that the platelets not only seal [...]

bgm - Item number: 7676252 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Motor housing> Retaining plate Other customers who are interested in retaining plate ignition coil / CDI -BGM ORIGINAL- Vespa PX 80 (V8X1T), PX 125 (VNX1T, VNX2T), PX 150 (VLX1T), PX 200 (VSX1T), Rally 200 (VSE1T [...]

bgm - Item number: BGM6398UB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.6 mm x 2500mm, sleeve = 2200mm, nipple Ø = 5.5mm x 7.5mm, inner sleeve PE, black- used as a shift cable are interested, also looked for: [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Our three-pole electronic flasher relay is ideal as a replacement for a conventional flasher relay. Most manufacturers use an inexpensive mechanical relay ex works, this clocking always only depends on the attached load, i.e. on the wattage of the indicator bulbs used. If this is changed significantly, e.g. through the use of LED technology, a [...]

The bgm PRO Racing shaft with 54 mm stroke is the maximum for racing or ambitious road tuning. In contrast to a normal shaft, the cheek diameter has been increased in order to achieve the necessary, higher overlap on the crank pin and thus additional security against rotation despite the increased stroke. This minimizes the risk of twisted cheeks and welding with [...]

Knob choke lever for the bgm PWK, Keihin PWK and Stage 6 PWK carburettors bgm - item number: BGM8510 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Carburetor> Carburetor Components Other customers who are interested in choke -BGM ORIGINAL for PWK- pull button on the carburettor (bgm, Stage [...]

24 piece stud bolt set BGM Original for the gear shift / crankcase of the Vespa 80-200ccm largeframe engines. Manufactured from high tensile strength steel with a rolled thread. In contrast to a cut thread, the surface is firmer and the thread flanks are press-polished. This results in a highly resilient and permanently durable thread. Tightening torque M7: 13-18Nm Scope of delivery: 6x stud bolts M7x50mm 6x nut M7 [...]