CARBURETOR TUNING SET BGM FOR DELL'ORTO PHBH28 / PHBH30 Tuning set for the classic Dell'Orto PHBH series or its replicas (YSN) SCOPE OF DELIVERY Main nozzles: 130,135 Auxiliary nozzles: 58,60 Mixing tube: AS266 Needles: X3, X7, X13 The set offers a very good one Basic set-up for almost all tuned Vespa / Lambretta engines. MAIN JET The main jet oscillates around 130-135 in most engine setups [...]

High-quality thrust block made of high-strength 42CrMo4. Better and cheaper than the original. bgm - Item number: SC9000 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Gearbox> Gearbox Other customers who are looking for thrust block for shift claw -BGM PRO- Vespa V50 , V90, SS50, SS90, PV125, ET3, [...]

The Cosa clutch springs are available in different spring rates to adapt the clutch to the respective purpose. The rule of thumb for spring stiffness is: as hard as necessary, as soft as possible. General statements on the relationship between engine power / torque and spring stiffness can only be made approximately precisely. Especially since the number of springs used also plays an extremely important role [...]

Set di fissaggio per il cavo contachilometri -BGM ORIGINAL- contachilometri italiani e spagnoli Lambretta LI (3a series), LIS, SX, TV (3a series) bgm - Item number: BGM6402SN Availability: in stock (Please check availability here in the Scooter Center Shop ) Weight: approx. 0,00 kg Category: Frame> Fork> Speedometer cables Other customers who are interested in mounting sets [...]

When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers have asymmetrical degrees of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm engine silent rubbers supplied in pairs, the chassis gains directional stability, steering precision and rigidity. The assembly is easy and offers eg [...]

Small antique metal rear light that cuts a fine figure on many Vespas. Very high quality reproduction with a solid metal die-cast housing. Comes complete with a black rubber seal and both 6 V and 12 V lamps. bgm - Item number: BGM5033 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

Cylinder base gasket -BGM PRO- 0,8mm Polini 177ccm (aluminum) bgm - Item number: WS5157 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM ORIGINAL Polini / Parmakit 177 ccm- Vespa PX80, PX125, PX150 - 0.8mm, [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

High-precision reproduction of the original auxiliary shaft axis of the Vespa GS160 and SS180 models. Made of extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. The scope of delivery also includes the corresponding red brass fitting bushing. This means that the primary drive can be repaired with 100% factory specifications. bgm - Item number: 7676645 Availability: in stock (Please check the [...]

Perfectly matching new edition of the leg shield edge protection for the Vespa PK50 S, PK80 S, PK125 S and PK125 ETS models. The PK S / PK ETS models have, compared to all other models, an inverted flanging of the leg shield edge. The PK S / ETS-specific edge protection was therefore not available for years. The edge protection is available in: Silver (PK S [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]