The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets. Regulated direct current output for the horn (12V DC) 12V USB charging output with up to 3A charging power 12V flasher relay [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

bgm - Item number: BGM6412ST Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frames> Cables> Cables Other customers who are interested in choke cables -BGM ORIGINAL- Vespa PX (- 1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), GT125 (VNL2T), GTR (VNL2T), TS125 (VNL3T), GL150 (VLA1T) - black interest, [...]

We can now offer you this long-running hit exclusively with a black base. Even more variants to fully adapt your SPDF to your needs! bgm - Item number: BGM5002LBE Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,67 kg Category: Frames> Electronics> Taillights Other customers who are [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BRAKE CALIPER MOUNT 'TOURING RADIAL' BGM PRO FOR LML Star / Stella Professional brake caliper mount from BGM PRO 'Made in Italy'. Enables the assembly of the radially attached BGM PRO 4-piston brake caliper. With fine controllability, this enables braking values ​​at motorcycle level. MAXIMUM DECELERATION A special feature of the BGM PRO brake calliper adapter is its uncompromising design for the greatest possible deceleration. The brake caliper was [...]

RT 225 bgm PRO Lambretta cylinder converted to a membrane inlet. The RT cylinders are perhaps the best choice for reliable, fast and economical engines. The harmonious power delivery is legendary and the engines are just fun in everyday life and on tour. Another step in expanding the RT cylinder is converting it to a diaphragm inlet. We offer the cylinders [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM6488 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Wheels> Clamping nipples and screw nipples Other customers who are interested in clamping plate set front brake -BGM ORIGINAL Vespa all models (-1981), PX (-1984) are interested, also looked for: clamping plates | Set | Rear brake cable | [...]

bgm - Item number: BGM778BT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in screw set rear shock absorber -BGM PRO- M9 x 70mm (with shoulder for hole Ø10mm), AF14, galvanized, incl. Nut - used for BGM PRO SC shock absorber / motor [...]