The power and torque values ​​of so-called smallframe motors that are now possible have increased significantly in recent years and seem to be growing steadily. Power and torque values ​​of well over 35PS / 30Nm can be found more and more frequently. As a result, other components are of course also stressed significantly more. An important and highly stressed link between the crankshaft and the gearbox is [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine, the BGM pole wheel an extremely quiet engine run. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output thanks to maximum number of windings Proven excitation coil [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

bgm - Item number: 8899001 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Gearbox> U-washers Other customers who are interested in plate pressure plate set chain tensioner -BGM ORIGINAL- Lambretta Series 1-3 are also interested in: Plate | Pressure plate set | Chain tensioner | Plate | Chain tension | Preload [...]

The LEDs for the rear lights and indicators slumber peacefully under the clear glass. Once switched on, you will no longer recognize your runner. The super bright diodes make for a worryingly aggressive look. Everything else can wrap up! bgm - Item number: BGM5015WL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: [...]

bgm - Item number: BGM2310M Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Gearbox> Variomatic slide shoes Other customers who are interested in Vario slide shoe set -BGM PRO- suitable for BGM2311, BGM2312 are also looking for: Vario | Sliding shoe | Set | Sliding shoes | Riser guide | Vario guide | [...]

Perfectly matching new edition of the leg shield edge protection for the Vespa PK50 S, PK80 S, PK125 S and PK125 ETS models. The PK S / PK ETS models have, compared to all other models, an inverted flanging of the leg shield edge. The PK S / ETS-specific edge protection was therefore not available for years. The edge protection is available in: Silver (PK S [...]

bgm - Item number: BGM3000EC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,02 kg Category: Oil & Chemicals> Oil Other customers who are interested in oil can (empty) -BGM PRO Oldie Edition (Vintage tin can) - 1000ml, also searched for: two-stroke oil | Two-stroke | 2 stroke | 2 | Clock | [...]

Throttle cable elbow set, as it is used as standard on our BGM carburettors. The throttle cable guide is not screwed tightly into the carburetor cover, but remains pivoted. The guide is attached with a clip on the underside. In this way, covers that have a thread (which may be defective) can be converted or reused without any problems. Including solid brass adjusting nut for [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]