High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. The rim is screwed into stainless steel with the special nuts provided. Their [...]

High-precision reproduction of the original auxiliary shaft axis of the Vespa GS160 and SS180 models. Made of extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. The scope of delivery also includes the corresponding red brass fitting bushing. This means that the primary drive can be repaired with 100% factory specifications. bgm - Item number: 7676645 Availability: in stock (Please check the [...]

Latest version of the proven BGM ORIGINAL ignition base plate for electronic ignition. BGM has revised the BGM original ignition base plate, which has proven itself a thousand times over, and made it even better. Particular attention was paid to the very high quality of the bobbins and the pickup. In addition, the cabling was converted to textile-coated silicone lines. The advantages that result from this compared to conventional PVC [...]

bgm - Item number: BGM6399UB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.9 mm x 2500mm, sleeve = 2200mm, nipple Ø = 8.0mm x 8mm, inner sleeve PE, black - used as a clutch cable, front brake cable are interested in looking [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM2775 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 75mm -BGM ORIGINAL- Vespa Smallframe V50, PV125, ET3, PK are also looking for: Engine housing bolts | Motor housing studs | Set | [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM01700N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Coupling> Nuts Other customers who are interested in M10 x1.00 (fine thread) SW = 16 half height -BGM PRO- (used as clutch nut Vespa for auxiliary shaft BGM PRO for V50, PV125, ET3, PK S, PK [...]

bgm - Item number: BGM8010GGP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Engine> Clutch> Clutch pressure plates Other customers who are interested in disc for clutch pressure plate -BGM PRO Superstrong 10 Springs - Lambretta - Type GP are interested, also looked for: Pressure plate | Clutch | Plate | [...]

The bgm PRO air filter is the perfect replacement for all Series 3 paper filters from the original air filter box. Thanks to the fine-meshed stainless steel net, the bgm filter not only offers excellent filter performance, but also a significantly improved air throughput than the standard part. The filter performance can even be increased when using filter oil. For normal road use [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]