The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The Kickstarter LIGHT offers an uncompromising racing look. The characteristic thing about holes is mostly the material on the outside of the drum and that is what the LIGHT Kickstarters have to offer. So this light throw can be used excellently to demonstrate what is under the bench. Radical weight reduction has always been one of the means to [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM0900E Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust spring -BGM ORIGINAL- stainless steel - 50mm , also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer | Exhaust [...]

BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

Speedometer glass incl. Decorative ring WHAT FOR Perfect repair kit for the speedometer. Either to replace a scratched / defective glass or to visually upgrade the speedometer. We also offer the sets in various designs. In our opinion, the tinted glass looks particularly elegant. HOW In the set is the speedometer glass ring that connects the speedometer glass and the speedometer [...]

Tuning kit to convert PX125 / 150 (and similar) engines to 177ccm. The set includes: cylinder kit BGM Pro 177 exhaust BGM Pro touring carburetor SI24 BGM Pro main jet set It is intended to obtain the best possible combination of power, torque and service life based on the series engine. The set can be used without further adjustment work (no milling, turning or grinding necessary).

Special tool - Made in Germany Dismantling tool for bearing type NBI253815. Suitable vehicles: Vespa PX, Cosa, Sprint Veloce. PK ETS Is used to remove the needle bearing cage of the crankshaft bearing from the small engine housing. To do this, dismantle the small motor half, remove the shaft seal and insert the tool from the shaft seal side. Heat the motor housing and remove the bearing with light blows.

bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]