BRAKE CALIPER MOUNT 'TOURING RADIAL' BGM PRO FOR Vespa PX Professional brake caliper mount from BGM PRO 'Made in Italy'. Enables the assembly of the radially attached BGM PRO 4-piston brake caliper. With fine controllability, this enables braking values ​​at motorcycle level. MAXIMUM DECELERATION A special feature of the BGM PRO brake calliper adapter is its uncompromising design for the greatest possible deceleration. The brake caliper was [...]

Oil can holder BGM PRO as a nice add-on for spare wheel holder in the leg shield / passage of Vespa and Lambretta The ideal place for a vintage oil can made of sheet metal (e.g. BGM3000 or BGM3000EC). The oil can holder is simply screwed onto the spare wheel holder and / or the spare wheel itself. With Vespa PX / LML it can also be used under the left side panel (if necessary, move the battery / horn rectifier). Attachment of the oil can eg [...]

BGM rim for all Lambrettas of the series 1-3 (Li, LiS, TV, SX, GT, DL, GP) - painted white. The bgm original rims offer you: High quality workmanship Very high accuracy of fit Correct rim profile Correct positioning of the valve hole Excellent concentricity for a pressed rim Excellent price / performance ratio The rim should be carefully checked each time a tire is changed. Decades-old rims [...]

bgm - Item number: BGM460ADJ Availability: not in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Handlebars> Brake-clutch levers Other customers who are interested in adjusting lever set for brake lever Set -BGM PRO Sport, adjustable + foldable- Vespa GT, GTL, GTS 125-300 (Hengtong brake system) - red anodized interest, also searched [...]

Front bgm shock absorber with 16-way adjustable pressure level regulation. Developed as an upgrade for all Vespas with separate shock absorber and spring units. Direct replacement, therefore easy to install. No modifications necessary. Wide adjustment range of the pressure level. In this way you can adjust the compression speed perfectly to your driving style. Hard anodized CNC housing. No registration requirement for pure shock absorbers without spring, therefore without TÜV [...]

Open intake manifold for all Piaggio 50-80 intake manifolds with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, as the original airbox continues [...]

bgm - Item number: BGM6486 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,23 kg Category: Motor> Brakes> Cable cables Other customers who are interested in the brake cable fastening set -BGM ORIGINAL M6 x 1,0mm- Vespa front PK S, PK XL / XL2, PX (1984-1998), Vespa rear PK S, PK XL / XL2, PX, Rally, [...]

Kyajet - PWK tuning tool (click) bgm - Item number: 2599132 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Carburetor> Carburetor needles Other customers who for needle set -BGM PRO XL- suitable for Keihin / Stage6 / bgm / Koso PE20, PWK24, PWK26, PWK28, PWK30 (HKJ, HLJ, JJK, JJL, JJM, [...]

SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfect for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for the on-board electronics of two-wheelers.

BGM Pro Sport bench made by Nisa Italy Based on the very popular Nisa 'Sport 20' bench, we had a BGM version made by NISA. AUTHENTIC LOOK The BGM Pro Sport bench has a beautiful Alfatex cover (embossed waffle pattern) on the sides and back and is also available with gray piping. The seat is also [...]

Clutch pads BGM PRO Superstrong 'Big Ear' Racing type PK XL2 / FL2 / HP (also suitable for V50, 50N, PV, ET3, PK S, PK XL) - 4-disc CR80 pads with extra wide tab for all smallframe motors Pad type with 1x large bracket for maximum support in the clutch basket Sintered lining material such as Honda CR80 Suitable for all smallframe clutches Lining thickness (incl. carrier material): [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]