bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

Special tool for assembling the primary drive in Vespa smallframe engines GENTLE ASSEMBLY With the primary wheel pulling tool from bgm, the large primary wheel is gently drawn into the bearing seat. The bushing of the assembly aid is supported on the inner ring of the bearing. Therefore, no pressure is transferred to the sensitive bearing surfaces, balls and the motor housing during assembly. The [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

Handy tool to carry out all work on the PWK carburettors quickly and efficiently. So adjusting the carburetor is a big part of the horror. bgm - Item number: 2599105 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Carburettor> Tools Other customers who are [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

High performance racing shaft from BGM. Suitable for all powerful smallframe motors that not only know how to use the advantage of a very well balanced shaft in conjunction with a very stable connecting rod but also urgently need it. Due to the steadily increasing performance of the supposedly small engines, the demands on the material also became higher and higher. [...]

Lambretta cylinder base gasket with a thickness of 2,0 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Ignition / alternator with ignition contacts for Vespa P125X, P150X, Italian version without battery with 4 indicators. 12Volt, 5 coils, 3 cables, AC A complete, ready-to-install replacement ignition base plate with all coils as well as the contacts and the capacitor is supplied. The connection cables have the original colors, so replacement is made easy. On-board voltage: 12V AC cable: 5 [...]

You can use the pins to block the clutch bell in order to loosen the clutch nut. The large nut of the coupling can be removed with the inner hexagon key. bgm - Item number: BU5506 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,27 kg Category: Motor> Clutch> Tools Other customers who [...]

bgm - Item number: BGM6396UG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,16 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -BGM ORIGINAL, Ø = 1.2 mm x 2500mm, sleeve = 2200mm, nipple Ø = 3mm x 3mm, inner sleeve PE, braided cable, gray - used as a throttle cable interested, searched [...]