Grip, cornering, directional stability, handling, wheelspin, braking behavior? All of these are demands that your chassis must be able to cope with. bgm offers the right damper for every application. The bgm PRO series offers you high tech at its best. You can not only adjust the spring tension of the black and white gas pressure shock absorbers to your individual needs, they also offer you [...]

Modern designed turn signal pair with E marking, which fits perfectly with the bgm rear light. Cannot be installed in conjunction with a downhill handlebar. For problem-free operation of the indicators, please order our electronic flasher relay BGM6203 at the same time. bgm - item number: BGM5000LI Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,35 kg [...]

High quality cast aluminum cylinder with a very resistant Nikasil coating. Aluminum is thermally superior to conventional gray cast iron because it emits the heat generated by the combustion process in the cylinder much better. It is not for nothing that all high-end cylinders are made of this material. A material that withstands such extreme loads as occur in the high-end sector, [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

The pole wheel of the V50, PV125, ET3 etc. is flatter than that of the later PK models. Anyone who converts their engine to modern ignition technology (or swaps the entire engine) will no longer get the old original fan wheel cover installed. This is where our spacer comes in, which separates the cover from the pole wheel. Simply place between the cover and the motor housing [...]

The bgm PRO assembly stand is ideal for maneuvering the scooter when its engine is removed. The assembly stand acts as a maneuvering aid and makes the scooter chassis extremely manoeuvrable thanks to the smooth-running industrial castors (shopping cart principle). To do this, the assembly stand is simply attached to the mounting points of the motor (the corresponding bolt for attaching is of course included). The scooter thus receives [...]

Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburetors with manual choke control. The PHBN series is mainly used on vehicles with a Minarelli engine bgm - item number: 7673421 Availability: in stock (Please check availability here [...]

The BGM BigBox Sport - the wolf in sheep's clothing Performance like a racing exhaust - optics & acoustics like a standard exhaust The BGM BigBox Sport is a thoroughbred Vespa racing exhaust with the unsuspecting design of an original exhaust. Like the original Vespa exhaust, the BigBox is of course double-walled and provided with insulating wool. It positions itself as a clear [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]

bgm - Item number: BGM2710 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 3,93 kg Category: Frame> Seat> Seat covers Other customers who are interested in seat covers -BGM PRO- LAMBRETTA- LI , TV (Series 2) - Red Beige are also interested in: Seat cover | Coating | Seat cover | Seat cover [...]