For the simultaneous installation of an original alarm system and LED indicator kit in Vespa GT / GTS / GTL vehicles built before 2014. This means that the indicator kit can be operated in parallel with an alarm system. bgm - Item number: PV60CKTA Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Frames> Electronics> Blinker Other [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The main nozzle of the SI carburetor determines how much gasoline is made available for the so-called premix or pre-expansion. The larger the displacement and the higher the liter output, the greater the need for spraying, roughly speaking. The available palette ranges from 90-160. A 102 main jet has a bore of 1,02mm, and is therefore less [...]

Single flange plate of the BGM exhaust adapter for Vespa T5 engines. Single spare part. The outlet flange pipe is still required for completion. (US) bgm - Item number: 3330594 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,66 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust flange plate (for connecting pieces) - BGM Vespa [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]

The bgm PRO membrane block comes with a powerful two-flap membrane. The GRP platelets are state of the art for optimum response behavior and high performance. In addition, the GRP plates have an extremely long service life, which means that maintenance is reduced to a minimum. The light metal block is vulcanized with rubber. This means that the platelets not only seal [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Diaphragm plates are subject to natural wear, similar to piston rings and clutch shoes. The membrane plates should therefore be replaced at regular intervals. With the bgm ORIGINAL membrane blocks we offer you a cheap replacement in original equipment quality. Since everything is already pre-assembled, the change is quick and easy even for inexperienced screwdrivers. bgm - Item number: R100560020 Availability: on [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

bgm - Item number: BGM6478TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 8mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

bgm - Item number: BGM6396UB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,16 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.2 mm x 2500mm, sleeve = 2200mm, nipple Ø = 3mm x 3mm, inner sleeve PE, braided cable, black - used as a throttle cable are interested, searched [...]