bgm - Item number: BGM778BT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in screw set rear shock absorber -BGM PRO- M9 x 70mm (with shoulder for hole Ø10mm), AF14, galvanized, incl. Nut - used for BGM PRO SC shock absorber / motor [...]

Lambretta bgm PRO MRB RaceTour membrane piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 195 cylinder to diaphragm control and have a durable [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

bgm - Item number: BGM6488X Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frame> Wheels> Clamping nipples and screw nipples Other customers who are interested in clamping plate set front brake -BGM ORIGINAL Vespa all models (-1981), PX (-1984) - 10 pieces are of interest, also looked for: clamping plates | Set [...]

bgm - Item number: BGM6413SC Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Frames> Trains> Speedometer cables Other customers who are interested in speedometer cables -BGM ORIGINAL- Vespa PX Lusso (from 1984), PX My, PX Disc, PX 2011, T5ccm, Cosa 125, Cosa 200, PK50 S [...]

Exhaust spring -ANTI RATTLE- stainless steel - 50mm: Stainless steel spring anti-vibration rubber Both heads can be rotated 360 ° Here you will find the luxury version of the exhaust springs, easy to hang in, rust-free and thanks to the rubber coating, completely rattle-free. bgm - Item number: BGM0902 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

Latest version of the Lambretta bgm shock absorber. Compared to its predecessor, many details have been further optimized. The biggest innovation is the ability to adjust the height of the shock absorber by 10 mm. This allows additional space to be created between the frame and the suction cup. New features: bushings with silent rubbers mounted progressively wound spring rebound and compression damping with hard marking [...]

An electric choke completely relieves the driver of the tedious work of operating the choke, which is why these are also integrated in almost all modern vehicles ex works, provided they do not already have an injection. The technology in these small black boxes is kept relatively simple. The basic position of the choke is generally always "operated", ie the [...]

BGM end sleeves are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old original from Piaggio. This guarantees a perfect fit. End sleeves have a thin shoulder at the end. They are required to fix outer cable shells in the sheet metal of the abutment (in the steering head) to prevent slipping and

bgm - Item number: BGM6610BK Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,66 kg Category: Motor> Rubber parts> Hoses Other customers who are interested in radiator hose set -BGM PRO silicone 180 ° C- Vespa GT 125-200, Vespa GTL 125-200, Vespa GTS 125-300, Vespa GTV 125-250 - black are interested, also looked for: [...]