BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Mark Broadhurst has incorporated his experience from several decades of Lambretta tunings and over 1.700 tuned two-stroke cylinders into the development of the RaceTour cylinders. The cylinders are available with 195ccm (65mm bore) for the small engine case with 125-175ccm and with 225ccm (70mm bore) for the 200ccm engine case. The cylinders offer significantly increased performance and [...]

Clever tool from BGM for the damage-free installation of studs. Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. It is braced with the thread of the stud bolt. Now turn the outer wrench flat. The stud bolt is fixed and is loosened or screwed in. Pay attention to a sufficiently firm counter-locking so that [...]

bgm - Item number: BGM6887S35 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Engine> Rubber parts> Carburettor connecting rubbers Other customers who are interested in connecting rubber with flange inlet system -BGM ORIGINAL Smart Flow- AW = Ø35mm, hole stitch = 60mm - PHBH28 / 30, VHST24-26, VHSH30, TMX27-30, TM28, PWK28, Polini24-30 are interested, also looked for: [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

Very good OEM quality bgm - item number: 950308 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Kick starter pinions Other customers who are looking for kick starter pinions with spring -BGM ORIGINAL - Are interested in CPI 50 cc, also searched for: Kickstart pinion | Kick starter wheel | Kick starter drive | Kicker pinion | [...]

Oil can holder BGM PRO as a nice add-on for spare wheel holder in the leg shield / passage of Vespa and Lambretta The ideal place for a vintage oil can made of sheet metal (e.g. BGM3000 or BGM3000EC). The oil can holder is simply screwed onto the spare wheel holder and / or the spare wheel itself. With Vespa PX / LML it can also be used under the left side panel (if necessary, move the battery / horn rectifier). Attachment of the oil can eg [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with a connection size of Ø = 35 / 40mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. This conversion link allows [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

bgm - Item number: BGM4940 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are looking for castle nut rear wheel bearing- BGM original- VESPA Øi = 40mm, Øa = 49mm, teeth = 9- Vespa Super 125 (VNC1T), Super 150 (VNB1T -153261), for front wheel bearings Vespa GS160 (VSB1T, VSB2T), SS180 [...]