bgm - Item number: 3332152 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,70 kg Category: Frame> Tank> Petrol taps Other customers who are interested in mounting for fuel tap lever -FAST FLOW- Vespa - Interested in aluminum, also looked for: fuel tap | Vacuum cock | Fuel cock | Rooster | Petrol tank | Petrol [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM7916 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Clutch> Ball bearings Other customers who wanted needle roller bearings -BK 0712- (07x14x12mm) - BGM ORIGINAL- (used for clutch shaft / clutch cover Vespa V50 (from 1978), PV125 (from 1978), ET3 (from 1978), PK [...]

bgm - Item number: BGM2780 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 80mm -BGM ORIGINAL- Vespa Largeframe (1984-), Vespa SmallframeV50, PV125, ET3, PK are also interested in: Engine housing bolts | Motor housing studs | [...]

Nice spare part that enhances every restoration. Aluminum. bgm - Item number: 9010029 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Motor> Gearbox> Kickstarter Other customers who are looking for Kickstarter Vespa V50, PV, ET3 - aluminum polished, also searched for: Kickstarter | Starter lever | [...]

The BGM Superstrong for Lambretta already has a "built-in" clutch compressor system. The Superstrong coupling can be easily compressed with just two screws and long nuts. On the face of the coupling spider, two of the legs are marked with a point, at the bottom of which is the threaded hole for the screw. Here the screws are used for pre-tensioning [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM Pro 'Easy Mount' oil filter for Piaggio / Gilera / Aprilia Leader & Quasar engines 125-300ccm The BGM Pro Easy Mount oil filter has the most modern microfilter technology and thus guarantees perfect protection of the interior of the engine. In addition, it can (in contrast to the original Piaggio oil filter) be changed quickly and easily with normal tools (ring spanner or socket, wrench size 21). Technical characteristics: [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]