Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburetors with manual choke control. The PHBN series is mainly used on vehicles with a Minarelli engine bgm - item number: 7673421 Availability: in stock (Please check availability here [...]

Only suitable for versions V1.0 and V2.0! bgm - Item number: BGM2105BR Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Brackets Other customers who are interested in front exhaust brackets -BGM PRO Clubman V1.0 , V2.0- Lambretta series 1-3 - silver interested, also looked [...]

Lambretta cylinder base gasket with a thickness of 2,5 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM chassis upgrade for Lambretta If you want to adapt the fork of your Lambretta to today's engine performance and the high demands on a modern chassis, you need high-quality damping components. BGM offers excellent working, multi-adjustable shock absorbers. Bolt On So that these can also be attached to forks without mounting points for shock absorbers, BGM offers screw-on brackets made of high-strength, anodized aluminum.

Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

Kickstater shaft for Peugeot, Honda and Kymco In very good OEM quality bgm - Item number: 06555741 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Gearbox> Kick starter shafts Other customers who are interested in kick starter shaft -BGM ORIGINAL- Peugeot 50 cc, Honda 50 cc, Kymco 50 cc, [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

bgm - Item number: BGM8521A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in carburetors -BGM ORIGINAL PHBN 12- Minarelli 50 ccm (manual choke) - AW = 23mm, also looked for: carburetor | Carburetor | Gasifier | Atomizer [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]