BGM PRO Vario-kit with an extra long gear range, perfect pulling power and high rear wheel performance. The BGM Vario uses a shorter (kevlar reinforced) V-belt than is usual for Quasar motors. This allows the BGM to drive a significantly wider range of ratios without the V-belt touching the housing, as is the case with a Malossi Vario, for example. As a result, the [...]

Manufactured exactly according to our specifications, we have managed to use a very high quality organic pad mixture that is pressure and temperature stable on the one hand, but is still low in wear. The whole thing combined with a very good grip to always have the full torque on the rear wheel. Even with a very high spring force used, the separation path is [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]

bgm - Item number: BGM8880A Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Workshop requirements> Tools Other customers who are interested in hook wrenches for shock absorbers -BGM PRO- for Ø = 45mm interested, also searched for: hook spanners | Hook | Stretcher

The BGM Superstrong for Lambretta already has a "built-in" clutch compressor system. The Superstrong coupling can be easily compressed with just two screws and long nuts. On the face of the coupling spider, two of the legs are marked with a point, at the bottom of which is the threaded hole for the screw. Here the screws are used for pre-tensioning [...]

Crankshaft dismantling and insertion tool set Vespa Largeframe -BGM PRO- Made in Germany Press the crankshaft out of its bearing seat quickly and easily like a professional and pull it back in again. This is possible with the quality tool from BGM PRO. With this set, the crankshaft can be pushed out of its press fit in the bearing of the engine housing in a professional and material-friendly manner and also [...]

Tuning kit to convert PX125 / 150 (and similar) engines to 177ccm. The set includes: cylinder kit BGM Pro 177 exhaust BGM Pro touring carburetor SI24 BGM Pro main jet set It is intended to obtain the best possible combination of power, torque and service life based on the series engine. The set can be used without further adjustment work (no milling, turning or grinding necessary).

bgm - Item number: BGM8311 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutches Other customers who are looking for seals for spacer clutch cover -BGM PRO- Vespa Wideframe VM1T, VM2T, VN1T (-60000), VU1T, ACMA 125 (1951-1955), Motovespa 125N (1953-1958) - Ø = 128 × 0,5mm interested, looked [...]

bgm - Item number: BGM778BT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in screw set rear shock absorber -BGM PRO- M9 x 70mm (with shoulder for hole Ø10mm), AF14, galvanized, incl. Nut - used for BGM PRO SC shock absorber / motor [...]

The bgm Pro kick starter pinions are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. They are manufactured exactly according to Piaggio original dimensions. Always consistently high quality. No compromise. LUBRICATION GROOVE As a special feature, the bgm Pro pinions also have a lubricating groove in the [...]

bgm - Item number: BGM8010S Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Clutch> Clutch baskets Other customers who are looking for clutch spider -BGM PRO Superstrong 10 springs- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP interested, also looked for: coupling spider | Spider | [...]

Cylinder base gasket -BGM PRO- 1,0mm Polini 207, 210, 221ccm bgm - item number: 3820037 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Others Customers who are interested in Spacer cylinder base -BGM ORIGINAL Polini 207 ccm - 210 ccm - 221 ccm- Vespa PX200, [...]