Handy tool to carry out all work on the PWK carburettors quickly and efficiently. So adjusting the carburetor is a big part of the horror. bgm - Item number: 2599105 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Carburettor> Tools Other customers who are [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

Clever tool from BGM for the damage-free installation of studs. Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. It is braced with the thread of the stud bolt. Now turn the outer wrench flat. The stud bolt is fixed and is loosened or screwed in. Pay attention to a sufficiently firm counter-locking so that [...]

Cylinder head gasket -BGM PRO- 1,5mm Malossi 139ccm & 166ccm bgm - item number: 3820046 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers, who are interested in spacer cylinder head -BGM ORIGINAL Malossi 139/166 ccm- Vespa PX80, PX125, PX150 - 1.5mm, were looking for [...]

Developed for performance-oriented engine concepts. The fastening should be done with Loctite medium strength WITHOUT a locking plate. The recommended tightening torque is 55-60 Nm. Tried and tested in racing and found to be good. bgm - Item number: 7672106 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Crankshaft> Nuts Other customers, [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Lambretta cylinder base gasket with a thickness of 3,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]

bgm - Item number: BGM8040N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition -BGM PRO base plate HP V4.5 Interested in silicone DC Lambretta electronic ignition, also looked for: ignition | Alternator | Lima | Alternator | [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM6473 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Workshop requirements> Tools Other customers who are interested in crimping pliers with ratchet function -BGM PRO- for end caps cable Outer shell Ø = 4mm, Ø = 5mm, Ø = 6mm are interested, also looked for: Crimping pliers | Crimping tool | Ferrules | Cable lug | Pliers | [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]