Cylinder head gasket -BGM PRO- 0,8mm Malossi 139ccm & 166ccm (aluminum) bgm - item number: WS5161 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Malossi 139/166 ccm- Vespa PX80, PX125, PX150 - 0.8mm, [...]

Compact voltage regulator for all alternators with 12 volts. The controller supplies alternating current and optionally also direct current. Thus, it is not only the perfect and reliable replacement for all conventional voltage regulators, it also enables a modern expansion of the existing on-board network. AC - AC alternating current: Input and output for the unregulated alternating current of the ignition base plate and the regulated current [...]

bgm - Item number: BGM0900EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 50mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Nice spare part that enhances every restoration. Aluminum. bgm - Item number: 9010029 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Motor> Gearbox> Kickstarter Other customers who are looking for Kickstarter Vespa V50, PV, ET3 - aluminum polished, also searched for: Kickstarter | Starter lever | [...]

Lambretta cylinder base gasket with a thickness of 3,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

bgm - Item number: 3710019 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (12x15x15mm) - Peugeot 50 cc (vertical cylinder), Derbi Senda, Minarelli AM6 are interested, also searched for: connecting rod bearings | Needle roller bearings | Piston pin bearings | [...]

bgm - Item number: 7676604 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Rubber parts> Bushings Other customers who are interested in bushing silent rubber shock absorber / motor -BGM ORIGINAL (Made in Germany) Ø = 9mm x 46mm- Vespa GS160 / GS4 (VSB1T), SS180 (VSC1T) are interested, also looked for: [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

bgm - Item number: BGM8522A Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in carburetors -BGM ORIGINAL PHBN 12- Minarelli 50 ccm (Elektrochoke) - AW = 23mm, also looked for: Carburettor | Carburetor | Gasifier | Atomizer | [...]

This is the right controller to convert the vehicle electrical system completely to direct current (= DC). A corresponding ignition base plate such as the BGM8040 is also required. When converting to DC, a battery must be connected to the wiring harness. The connection of the controller is very simple: yellow from controller to yellow from the ignition base plate - 2x black ground [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]