BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

bgm - Item number: BGM778BT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are interested in screw set rear shock absorber -BGM PRO- M9 x 70mm (with shoulder for hole Ø10mm), AF14, galvanized, incl. Nut - used for BGM PRO SC shock absorber / motor [...]

bgm - Item number: BGM66060P5 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- Type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 5 plug contacts are of interest, also looked for: Plug | Cable | Ignition stator | [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Kyajet - PWK tuning tool (click) bgm - Item number: 2599132 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Carburetor> Carburetor needles Other customers who for needle set -BGM PRO XL- suitable for Keihin / Stage6 / bgm / Koso PE20, PWK24, PWK26, PWK28, PWK30 (HKJ, HLJ, JJK, JJL, JJM, [...]

BGM small parts for the brake cable fastening are manufactured by a supplier for the Japanese motorcycle industry in an excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high quality of the material enables reliable fastening of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6484X Availability: in stock [...]

bgm - Item number: BGM2225K Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Cylinders> Piston pins Other customers who are interested in piston pins -BGM PRO MRB-Racetour 225 ccm - Are interested in Lambretta TV 200, SX 200, DL 200, GP 200, also looked for: piston pin | Piston holder | [...]

Kickstater shaft for Peugeot, Honda and Kymco In very good OEM quality bgm - Item number: 06555741 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Gearbox> Kick starter shafts Other customers who are interested in kick starter shaft -BGM ORIGINAL- Peugeot 50 cc, Honda 50 cc, Kymco 50 cc, [...]

bgm - Item number: 3330287 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 1,5mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

This practical bgm Pro dosing bottle fulfills two tasks: on the one hand it serves as a storage container for amounts of up to 500 ml and at the same time small amounts can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower body of the bottle and has graduation marks in 5 ml increments up to 25 ml.

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]