BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM6475B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,40 kg Category: Workshop requirements> Trains Other customers who are interested in outer cover -BGM ORIGINAL, PE inner cover- Ø outside = 5mm (l = 25 meters) - interested in black, also looked for: outer shell | Train | Coat | Outer cable | [...]

Speedometer BGM ORIGINAL 120km / h for Vespa PX (years of construction 1977-1984) Very nice reproduction of the original speedometer for the old Vespa PX models ('77 -'84). Has a precise eddy current measuring mechanism. The speed display is therefore pleasingly accurate *. Visually very close to the original, the BGM ORIGINAL speedometer also has an odometer with a hundred meter counter. The speedometer lighting uses, deviating [...]

Exhaust BGM Pro SPORT Banana for Vespa Smallframe PV125, ET3 models. Also fits 125ccm (or larger) converted Vespa V50, 50N, 50 Special, V90, SS90, 90 Racer, V100 models. The BGM Pro Banana in the SPORT version offers a subtle look with the performance values ​​of a racing exhaust. It goes into resonance from approx. 5000 rpm and pushes [...]

bgm - Item number: BGM2586 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,11 kg Category: Engine> Carburettor> Spacer Other customers who are looking for intake manifold spacers -BGM PRO Malossi / Polini-Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - 10mm are interested, also looked for: Intake manifold spacer | Spacer [...]

bgm - Item number: BGM0292HS08 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 0.8mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM High Ease spark plug connector. True to the motto -Less is more- designed spark plug connector. Sits very tightly on the spark plug and consists of so few parts that nothing can get loose. For spark plugs with screwed-on nipple bgm - item number: 3309006 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx .0,01 [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Perfectly coordinated carburetor kit. The scope of delivery includes the bgm PRO 17 carburetor, the bgm PRO intake manifold and all the small parts required for assembly. The bgm PRO carburetor is super easy to tune. The PHBN series is widespread and so all tuning parts are readily available. The open BGM PRO intake manifold is perfectly matched to the carburetor. CONCLUSION: [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Noble BGM PRO aluminum cover for the engine cover of Vespa GT, GTV, GTS (until 2019), LX, S, ET4 Cover for the coupling nut of the Vario cover on the left side of the vehicle. This is centrally located in the field of vision and offers a nice opportunity to significantly upgrade the appearance of the scooter with little effort. MATERIAL & SURFACE High-strength aluminum (6061) which finally [...]