Noble turn signals with LED technology. Beautify every Vespa ZIP 2 / ZIP SP from 2006 onwards in next to no time! Can be easily exchanged. Note: In some vehicles, the turn signals can no longer cycle as usual due to the low load caused by the LED technology. Load resistors (see accessories) can also be installed here. This simply between the two [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

The main nozzle of the SI carburetor determines how much gasoline is made available for the so-called premix or pre-expansion. The larger the displacement and the higher the liter output, the greater the need for spraying, roughly speaking. The available palette ranges from 90-160. A 102 main jet has a bore of 1,02mm, and is therefore less [...]

Suitable for suspension strut BGM7789NB. bgm - Item number: BGM7789NBASP Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Shock absorbers> Springs Other customers who are looking for shock absorber springs rear, soft, black -BGM PRO SC / R12 COMPETITION- Vespa GT, GTL, GTV, GTS 125-300 (all years of construction) are interested, also searched [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

Perfectly coordinated carburetor kit. The scope of delivery includes the bgm PRO 17 carburetor, the bgm PRO intake manifold, sport membrane and all the small parts required for assembly. The bgm PRO carburetor is super easy to tune. The PHBN series is widespread and so all tuning parts are easily available. The open BGM PRO intake manifold fits perfectly onto the carburetor [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]

Special tool - Made in Germany Assembly tool for bearing types NBI253815 and B188. Suitable vehicles: Vespa PX, Cosa, T5, Sprint Veloce, PK ETS Is used to mount the needle bearing cage of the crankshaft / main shaft bearing in the small engine housing. Heat the motor housing and drive the bearing into the housing with light blows (without tilting). TIP: The ideal addition is our recoil-free [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

bgm - Item number: BGM2220HS03 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 65,0 , 8mm 125-way screw connection - Lambretta LI 150-125, LIS, SX 150-175, TV 2 (series 3-125), DL / GP 150-0,3 - XNUMXmm [...]

bgm - Item number: BGM0233S10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinders> Spacers Other customers who are interested in spacers cylinder base -BGM ORIGINAL for Polini Evolution 133ccm , Parmakit SP09 130ccm, 135ccm, Parmakit Evo (-C) 135ccm- Vespa V50, PV125, ET3, PK50, PK80, PK125 - [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]