Very high quality special nut, made in Germany, for all Vespa engines with the clutch on the crankshaft built before 1990, which originally have a so-called castle nut. So therefore suitable for all vehicles built from 1950 onwards, such as V1-V5, VNB, VNA, GS150, GS160, Sprint, Rally, GT, GTR, T5, Cosa1, PX, PE etc ... These in Germany [...]

Complete kit to re-store the crank mechanism. Absolutely recommended as a replacement measure or when installing a new crankshaft. The kit contains: 6305 FAG bearings for the drive side NU2205 bearings for the generator side * Drive-side Viton shaft seal from MB Developments Inner Viton shaft seal from MB Developments for the Maghousing Outer Maghousing shaft seal 6305 Seal Four Allen screws for [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

England was the only market where Lambretta sales outpaced Vespa sales. The main reason for this is the excellent marketing strategy of the Lambretta Concessionaires. The success story of the Lambretta is documented extensively and in great detail in Stuart Owen's book about the Lambretta Concessionaires (Article No. 3332513). In addition to special models and special color combinations, there was also the Pegasus bench. The was [...]

bgm - Item number: BGM5710B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frame> Body> Luggage hooks Other customers who are interested in luggage hooks -BGM PRO Aluminum CNC- Vespa GT , GTS, GTV, GTL, S - 50-300ccm - black are also interested in: Luggage hooks | Bag | [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The material is spared. Used to mount the outer needle bearing (facing the fork) of the front brake anchor plate of the Vespa PX, T5, Cosa and PK models. [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

bgm - Item number: BGM1925 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -bgm original 19 × 15,5mm - 9,20g, also searched for: Weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Open intake manifold for all Piaggio 50-80 intake manifolds with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, as the original airbox continues [...]