Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

The BGM PRO inner cable for the Lambretta rear brake (series 1-3) has a cast threaded part. ADVANTAGES The rear brake cable is now one-piece, the original compression fitting is no longer necessary. The motor can be removed from the frame much faster. The brake cable remains permanently ready for use because it is no longer squeezed. Like the original adjuster, it has an anti-twist device [...]

The bgm PRO Racing shaft with 51 mm stroke is perfect for class 1 of the ESC and people who need a stable shaft for ambitious road tuning. The proven crank webs of the 54 mm shaft are used here. The larger cheek diameter was retained here to provide the necessary, higher overlap on the crank pin and thus additional [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

bgm - Item number: BGM6413FB Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Frames> Cables> Cables Other customers who are looking for front brake cables -BGM ORIGINAL- Vespa PX Lusso (Bj. 1984-97), T5 125cc - complete - black are interested, also looked for: brake cable | Brake cable | [...]

Shoulder ring set with two circlips and one BGM Pro shoulder ring with a thickness of 1,00mm Suitable for the main shaft of Vespa Largeframe PX Lusso (1984-), My, 2011, Cosa, T5, LML, Vespa Smallframe e.g. V50, 50N, SR50, SS50, V90, SS90, 90 Racer, V100, PV125, ET3, PK S / XL / XL2, PK ETS bgm - Item number: BGM6020KTL2 Availability: out of stock (Please [...]

BGM Pro SC SPORT shock absorbers -Sporty- Comfortable -Adjustable-With TÜV- Sportiness paired with outstanding optics. With factory pre-configured damping, spring preload (pre-load) continuously adjustable. HARMONIOUS The BGM Pro SC SPORT coilover kit convinces with its harmonious basic set-up. Intended for sporty driving on the road, the predefined specific damper setting and spring rate is an optimal balance of sportiness and suitability for everyday use. [...]

Open intake manifold for all Piaggio 50-80 intake manifolds with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, as the original airbox continues [...]

Front shock absorber pair bgm COMPETITION with 16-way adjustable rebound and compression regulation. Thanks to the expansion tank, the COMPETITION dampers are fully suitable for racing and were successfully driven by the Replay team in the 2018 English BSSO racing series. Compared to the BGM Pro Sport dampers, they offer a wider setting range, respond even better and are thermally very stable due to the larger oil volume. [...]

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]